Heath Zenith SL-6157 User Manual page 3

5. Adjust the Microphone Sensitivity so that it is at the least sensitive posi-
tion to reliably activate the transmitter. If the sensitivity is set too high, it
may false trigger on common household noises.
6. When the system is working properly, carefully mark the desired location
of the Extension Transmitter, and go to step 7 for final installation.
Install the battery cover.
Peel the protective backing from one side of two pieces of the double
sided tape, and apply the tape to the areas on the back of the transmitter
as shown in Figure 4.
Double
Sided Tape
Remove the remaining protective backing. Carefully stick the transmitter
to the exact location marked in step 6.
7b - Mount with Screws & Hollow-Wall Fasteners
Temporarily remove the batteries.
Hold the transmitter in the desired location, and mark the two mounting holes.
Set the transmitter aside. Drill two 7/32 inch mounting holes. Tap the hol-
low-wall fasteners into the two holes.
Hold the transmitter in place, and secure with the two screws.
Reinstall the batteries and the battery cover.
595-5345-05
7a - Mount with Double Sided Tape
Figure 4
Figure 5
Mounting Holes
-3-
Double
Sided Tape