Installation; Wlan Module Install - LG Smart AC User Manual

Smart inverter remote control system

Hide thumbs Also See for Smart AC:

Table of Contents

User Manual

INSTALLATION

* The feature can be changed according to a type of model.

1. Open the LG Smart AC box, and remove the module from the plastic wrapper.

2. Verify that indoor unit is turned off and power is cut off at the outdoor unit's

input power circuit breaker.

3. Open the front panel of the indoor unit and remove the USB port plastic cap

(1) and insert WLAN module (2). Close front panel of unit.

4. Turn power on by turning back on through the power breaker and then turn in-

door unit on.

5. Optionally, place a WLAN module into each indoor unit as necessary before

proceeding.

NOTE

• Avoid to install WLAN module in a place blocked by the wall.

• Router should be installed near the WLAN module.(When distance is far, communi-

cation becomes unstable and can be difficult to use)

• If there is the wall or a barrier between WLAN module and wireless router, commu-

nication will be not smooth. (It depends on wall construction or a barrier)

• Do not install WLAN module around high humidity and temperature place.

※Other details, please refer to the Products manual.

Due to our policy of continuous product innovation, some specifications may change without notification.

"LG" is a registered trademark of LG Corp.

CAP

Table of Contents

Show Quick Links

Table of Contents