Mitsubishi Electric WD8200U User Manual page 75

Specifications (continued)
Specification of RGB signals in each computer
mode of the projector (continued)
Important:
Some computers aren't compatible with the
projector.
The projector's maximum resolution is 1280 x
800 pixels. It may not display images of higher
resolutions than 1280 x 800 correctly.
Images with SYNC on G (Green) signal may jitter.
Images with SYNC on G (Green) signal may be
tinged with green.
If the resolution and frequency of your computer
aren't shown on the table, ind the compatible
resolution and frequency by changing the resolution
of your computer.
TV60 and TV50 are equivalent to 480i and 576i
respectively. When these signals are supplied to the
VIDEO IN or S-VIDEO IN terminal, the signal mode is
indicated as TV60 or TV50. When they are supplied to
the COMPUTER/COMPONENT VIDEO IN terminals,
the signal mode is indicated as 480i or 576i.
Connectors
SERIAL IN/OUT
(D-SUB 9-pin)
5 1
9 6
Pin No. Name I/O
1 – –
2 TXD IN
3 RXD OUT
4 – –
5 GND –
6 – –
7 – –
8 – –
9 – –
Dimension drawings (unit: mm)
Without terminal cover
490
*: Factory-defaults
COMPUTER/COMPONENT VIDEO
IN-1 (Mini D-SUB 15-pin)
5 1
10
6
15 11
Pin No. Spec. Pin No. Spec.
1 R(RED)/P /C 9 DDC 5V
R R
2 G(GREEN)/Y 10 GND
3 B(BLUE)/P /C 11 GND
B B
4 GND 12 DDC Data
5 GND 13 HD/CS
6 GND 14 VD
7 GND 15 DDC Clock
8 GND
421
video devices having 4 lines (R, G, B, CS*) or having 5
lines (R, G, B, H, V).
* : Composite Sync
REAL mode
When moire patterns or lines of uneven thickness
appear on the projected image, these symptoms may
be improved by displaying it in its original image size
(REAL mode). To display the image in the REAL mode,
set ASPECT of the FEATURE menu to REAL. (See
page 32 for menu setting.)
only their center part is displayed in the REAL
mode. The area exceeding the panel resolution isn't
displayed.
when the image resolution is lower than the panel
resolution.
with a black frame even when they have a higher
resolution than the panel resolution.
COMPUTER/COMPONENT VIDEO
DVI-D IN (HDCP) (DVI-D 24-pin)
24 17
9
16
8 1
Pin No. Spec. Pin No.
1 TMDS DATA 2- 13
2 TMDS DATA 2+ 14 +5V Power
3 TMDS DATA 2 Shield 15 Ground (for +5V)
4 - 16 Hot Plug Detect
5 - 17 TMDS DATA 0-
6 DDC Clock 18 TMDS DATA 0+
7 DDC Data 19 TMDS DATA 0 Shield
8 - 20
9 TMDS DATA 1- 21
10 TMDS DATA 1+ 22 TMDS Clock Shield
11 TMDS DATA 1 Shield 23 TMDS Clock+
12 - 24 TMDS Clock-
With terminal cover
490
EN-74
HDMI IN
(HDMI 19-pin)
Spec.
Pin No. Spec.
-
1 TMDS Data2+
2 TMDS Data2 Shield
3 TMDS Data2-
4 TMDS Data1+
5 TMDS Data1 Shield
6 TMDS Data1-
7 TMDS Data0+
-
8 TMDS Data0 Shield
-
9 TMDS Data0-
10 TMDS Clock+
19
1
2 18
Pin No. Spec.
11 TMDS Clock Shield
12 TMDS Clock-
13 CEC
14 –
15 SCL
16 SDA
17 DDC Ground
18 +5 V Power
19 Hot Plug Detect
506