Mitsubishi Electric WD8200U User Manual page 38

Menu operation (continued)
FEATURE menu
FEATURE
ITEM
ASPECT
PROJECTOR ID
GROUP ID
PASSWORD FUNCTION DISPLAY INPUT
MENU POSITION
CINEMA MODE
LANGUAGE
ADVANCED MENU
VIDEO SIGNAL
SETUP
opt.
1 1 2 2
ASPECT NORMAL (FULL)
PROJECTOR ID
ALL
GROUP ID A
PASSWORD FUNCTION
DISPLAY INPUT
1.
MENU POSITION
CINEMA MODE AUTO
LANGUAGE English
ADVANCED MENU ENTER
RESET ALL
OK
SETTING
NORMAL (FULL)
NORMAL (16:9)
NORMAL (4:3)
16:9
REAL
FULL
ALL
01 to 63
A to Z
/
/
MENU ACCESS
SPLASH ID SCREEN
1 (upper left) / 2 (lower right) /
3 (center)
AUTO
FILM
VIDEO
/ English / Español /
Deutsch / Français / Italiano /
/ / /
PORTUGUÊS / SVENSKA /
POLSKI / Nederlands/
Norsk(Bokmål) / Türkçe /
/ Bahasa Indonesia /
Bahasa Melayu /
ENTER
AUTO / NTSC / PAL / SECAM
/ 4.43NTSC / PAL-M / PAL-N /
PAL-60
AUTO
OFF
1 1 2 2
FEATURE
ADVANCED MENU
VIDEO SIGNAL
SETUP
SCART INPUT
LAMP WARNING
HIDE OSD
LAMP 1 TIME RESET
LAMP 2 TIME RESET
FILTER TIME RESET
FUNCTION
Input video signal is displayed at the max height (800 pixels) or max
width (1280 pixels) of the panel while its aspect ratio is maintained.
Select this setting when using a 16:9 screen.
Select this setting when using a 4:3 screen.
Regardless of the type of input signal, image is displayed at 16:9
aspect ratio (1280 x 720 pixels). Select to expand squeezed (or
horizontally compressed) images such as DVD images to 16:9.
Press the ENTER button to select whether or not to display signals
at 16:9 depending on their type. (See page 25.)
Input video signal is displayed at its original pixel size.
Select to project images in full size (1280 x 800 pixels) irrespective
of type of input signal.
Select this option to control the projector regardless of the ID
number. (See page 60.)
Use to set the ID number (two-digit number). (See page 60.)
Use to set the ID number for controlling multiple projectors by
groups for monitoring and control via the SERIAL terminal. (See
page 60.)
Use to enable or cancel the password lock. See page 56 for details.
Use to change the position of the menu.
The ilm mode will be automatically activated when a ilm source
signal is input.
Select AUTO for normal use.
When flicker occurs on the screen, frame dropping or other incorrect
display occurs, or jaggies on slanting lines are remarkable, select
either FILM or VIDEO, which improves the symptom better.
Fixed to the film mode.
The film mode will not be activated.
Use to select the language used in the menus.
The ADVANCED MENU is displayed for the following settings.
When AUTO is selected, the appropriate video format is
automatically selected depending on the input signal. If the image
isn't displayed correctly, select the desired video format manually.
Select to change the SETUP mode automatically.
Select to make black lighter.
Select to make black thicker.
up cancel function for the U.S. Choose OFF when the image is
dark.
EN-37
opt.
AUTO
AUTO
OFF
STANDARD
OFF
OK
OK
OK