Error Messages - Panasonic KX-TCA185 Operating Instructions Manual

Error Messages

Error Message
Register Unit
No Service
PS Not Connected
CS Busy
Please Wait...
Charge Battery
No Entries
Memory Full
Incorrect Entry
Need Repair
Transfer Error
Connect Error
BT Headset Link
Error
(For KX-TCA285/
KX-TCA385)
Possible Cause
The handset has been cancelled
or the handset has not been
registered.
The handset is out of range.
The CS is turned off.
The called handset is out of
range or is not turned on.
The CS is busy.
The handset is connecting to the
CS or PBX.
The handset battery has little
charge remaining.
When trying to view the
Phonebook: No items have been
stored. See "Storing an Item in
the Handset Phonebook" on
Page 47.
When trying to view the Incoming
or Outgoing Call Log: No logs
have been stored.
The Phonebook is full and cannot
store the new item.
The numbers you entered are
invalid.
A connection with a cell phone
has been interrupted.
An error occurred when
establishing a Bluetooth headset
connection.
The Bluetooth headset is out of
range of the handset.
Solution
Consult your dealer.
Move closer to the CS.
Make sure the power cord is
connected.
Try again later.
Try again later.
Wait for a moment.
Charge the battery fully. See
"Charging the Battery/Batteries" on
Page 74.
Remove unnecessary data in the
Phonebook and try again.
Recheck your entry (max. 5 digits)
and try again.
Consult your dealer.
Perform the connection procedure
with the cell phone again.
For details, see "Transferring
Phonebook Data from a Cell Phone
using Bluetooth" on Page 53.
Ensure the headset is operating
correctly, and then try to establish
the connection with the handset
again.
When you are using a Bluetooth
headset, always keep the handset
within range. We recommend
keeping the handset and headset
within 1 m of each other for best
performance.
Appendix
85