Related Manuals for Net Optics 10 GigaBit Media Converter Tap
Summary of Contents for Net Optics 10 GigaBit Media Converter Tap
- Page 1 Installation Guide for 10 GigaBit Media Converter Tap Doc PUBCVT50SRLRU Rev.1, 09/06...
-
Page 2: Table Of Contents
Installing the 10 GigaBit Media Converter Tap . . . . . . . . . . . . . . . . . - Page 3 10 GigaBit Media Converter Tap PLEASE READ THESE LEGAL NOTICES CAREFULLY. By using a Net Optics 10 GigaBit Media Converter Tap you agree to the terms and conditions of usage set forth by Net Optics, Inc . No licenses, express or implied, are granted with respect to any of the technology described in this manual .
-
Page 4: Transparent Access
Tap . Reliability For extra uptime protection, Net Optics 10 GigaBit SR to LR Taps offer redun- dant power connections . Should the primary power source fail, the Tap automati- cally switches to the backup power source . -
Page 5: Unpacking And Inspection
Our technical support team is available from 8 am to 5 pm Pacific Time, Monday through Friday at +1 (408) 737-7777 and via email at ts-sup- port@netoptics .com . FAQs are available on Net Optics website at www . netoptics .com . -
Page 6: Product Diagram
10 GigaBit Media Converter Tap Product Diagram LR Monitor Ports SR Network Ports Power LEDs (SC Interface x 1) (SC Interface x 2) Monitor Network 10 GigaBit SR to LR LASER ® CAUTION! Converter Tap www.netoptics.com Link LEDs Figure 1: CVT-50SRn/LR Front View Panel... -
Page 7: Installing The 10 Gigabit Media Converter Tap
10 GigaBit Media Converter Tap Installing the 10 GigaBit Media Converter Tap The Converter Tap has three SC connectors . The two network connectors are labeled A and B . The third connector is labeled Monitor (see Figure 1) . -
Page 8: Connecting To The Network
Remove Monitor Port dust cover taking care not to expose yourself to laser light . Using the Net Optics Custom Monitor Cable supplied with your Converter Tap, connect the single-duplex end to the Tap Monitor A/B Port (see Figure 4) . - Page 9 10 GigaBit Media Converter Tap 4 . Connect the other twin-duplex end to the appropriate monitoring device port to monitor the DTE link . Connect Custom Monitor Fiber Cable Connect Fiber In-Line Ports Monitoring Device Monitor Network 10 GigaBit SR to LR ®...
-
Page 10: Troubleshooting
Replace cables with cables known to be good. If these checks fail to correct the problem, note the unit’s serial number before calling Net Optics for assistance and be prepared to describe the installation scenario and the problem you are experiencing . -
Page 11: Specifications
10 GigaBit Media Converter Tap Specifications Operating Specifications: Operating Temperature: 0˚C to 55˚C Storage Temperature: -10˚C to 70˚C Relative Humidity: 10% min, 95% max, non-condensing Mechanical Specifications: Dimensions: 1 . 7 5” high x 10 .5” deep x 17” wide... -
Page 12: 10 Gigabit Ethernet Connection Distances
10 GigaBit Media Converter Tap 10 GigaBit Ethernet Connection Distances 10GB-SR (850 nm laser) Fiber Fiber Core Type Bandwidth Distance Diameter Mhz/km Multimode 160 Mhz/km 6 m 6.5 µm 6.5 µm Multimode 00 Mhz/km m 50.0 µm Multimode 00 Mhz/km 66 m 50.0 µm... -
Page 13: Limitations On Warranty And Liability
. Net Optics, Inc . warrants this GigaBit Media Converter Tap to be in good working order for a period of ONE YEAR from the date of purchase from Net Optics or an authorized Net Optics reseller . - Page 14 © 2007 by Net Optics, Inc . All Rights Reserved .
Need help?
Do you have a question about the 10 GigaBit Media Converter Tap and is the answer not in the manual?
Questions and answers