MSI Wind Box DE500 User Manual page 31

MS-6676
Connecting the External Display Devices (Optional)
This Wind Box DE500/ DC500 provides a VGA port for connecting a larger display
with higher resolution. The 15-pin-D-sub VGA port allows users to connect an ex-
ternal monitor or other standard VGA-compatible device (such as a projector) for a
great view of the Wind Box DE500/ DC500 display.
This Wind Box DE500/ DC500 provides a HDMI port for connecting a larger display
with higher resolution. HDMI (High Definition Multimedia Interface Support) is a new
interface standard for PCs, displays and consumer electronics devices that supports
standard, enhanced and high-definition video, plus multi-channel digital audio on a
single cable.
To connect the external display, make sure the Wind Box DE500/ DC500 and the
external display are both powered off, and then connect the display to the Wind Box
DE500/ DC500.
Once the display is connected to the Wind Box DE500/ DC500, power on the Wind
Box DE500/ DC500 and the external display should respond by default. If not, you
can switch the display mode by pressing [Fn]+[F2]. Alternately, you can change the
display mode by configuring the settings in Display Properties of Windows operating
system.
2-7