Specifications - Sharp SX66NF100 Operation Manual

Specifications

MODEL
Receiving System
TV broadcasts/ VCR playback
VCR playback
Laserdisc player playback
(Using RF-in terminal)
VCR playback
(Using S-Video In terminal)
Special VCR and VDP
playback
DVD playback
Stereo broadcast
Reception Channels
PAL-B/G VHF
UHF
CATV
Receiving Frequency
Teletext Language
Channel Tuning
Picture Tube
Terminals
Sound Output
Power Source
Power Consumption
Power Consumption during
Standby Mode
Dimensions
Weight (approx.)
• Design and specifications are subject to change without notice.
• Receiving system: These receiving systems, encompassing all currently available technology, include
those with planned broadcast, videotape and laserdisc hardware and software.
• Reception channels: Some examples of the main receivable channels are shown above.
Page 43
SX66NF100
PAL-I
PAL-B/G
PAL-D/K
SECAM-B/G
SECAM-D/K
NTSC-M (NTSC standard)
NTSC 4.43/5.5 MHz 60 Hz NTSC 3.58/5.5 MHz 60 Hz
NTSC 4.43/6.0 MHz 60 Hz NTSC 3.58/6.0 MHz 60 Hz
NTSC 4.43/6.5 MHz 60 Hz NTSC 3.58/6.5 MHz 60 Hz
PAL 5.5 MHz/60 Hz
PAL 6.0 MHz/60 Hz
PAL 6.5 MHz/60 Hz
S-VIDEO NTSC 3.58 MHz
S-VIDEO NTSC 4.43 MHz
S-VIDEO PAL
S-VIDEO SECAM
Video-in 50/60 Hz
S-Video in 50/60 Hz
COMPONENT IN
Progressive signal 50/60 Hz
Interlaced signal 50/60 Hz
A2 stereo-B/G
NICAM-I, B/G, D/K
AU0–AU12 ch, NZ1–NZ11 ch
E21–E69 ch
S1–S20 ch, S21–S41 ch (Hyper)
45.25 MHz – 855.25 MHz
Multi language
100-channel electronic tuner with Full Auto Tuning system
66 cm, flat CRT
Audio/video input × 3 (front × 1, rear × 2) , DVD input (COMPONENT IN) × 1 (rear)
Audio/video output × 1 (rear) , Headphones jack (front × 1) , S-video input × 2 (front × 1, rear × 1)
5 W (RMS) × 2, total 10 W (RMS)
AC 220 – 240 V, 50 Hz
160 W
Less than 1 W
786 (W) × 520 (H) × 490 (D) mm
41.5 kg
SX76NF100
SECAM-I (6.0 MHz)
76 cm, flat CRT
5 W (RMS) × 2 + 10 W (RMS)/(sub woofer),
total 20 W (RMS)
163 W
880 (W) × 566 (H) × 545 (D) mm
54.5 kg
03.7.30, 9:07 AM
43