Attaching The Stand - Sharp Aquos LC-40LE700X Operation Manual

Preparation

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work, spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Confi rm the 8 screws supplied with the TV.
1
Short screws (g4)
(used in step 3)
Attach the supporting post for the stand unit
2
onto the base as shown below.
Long screw
6
LC-40LE700X.indb 6 LC-40LE700X.indb 6
Long screws (g4)
(used in step 2)
Screw
driver
(not supplied)
• To detach the stand, perform the steps in reverse order.
1 Insert the stand into the openings on the
3
bottom of the TV.
2 Insert and tighten the 4 short screws into
the 4 holes on the rear of the TV.
1
NOTE
Screw
driver
(not supplied)
Short screw
Soft
cushion
1
6/26/09 4:25:31 PM 6/26/09 4:25:31 PM