Other Picture Settings; Adjusting The Image Position; Game Play Time - Sharp Aquos LC-40LE700X Operation Manual

Watching TV
H Range of OPC
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of +16 and a minimum of -16.
Selected item
Max. -15 through +16
Min. -16 through +15
NOTE
• This function is available only when the OPC setting is set to
On or On: Display.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number than
the maximum setting.
• The maximum and minimum settings cannot be set to the
same number.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
36
LC-40LE700X_en_f.indd 36 LC-40LE700X_en_f.indd 36
Description

Other picture settings

Adjusting the image position

For adjusting a picture's horizontal and vertical
position.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Position", and then
3
press ENTER.
Press a / b to select "H-pos." or "V-pos.".
4
Display position adjustment
H-pos. [ 0] -
V-pos. [ 0] -
Reset
Selected item
Centres the image by moving it to the left
H-pos.
or right.
Centres the image by moving it up or
V-pos.
down.
Press c / d to adjust the item to your desired
5
position.
NOTE
• For resetting all adjustment items to the factory preset values,
press a/b to select "Reset", and then press ENTER.
• Adjustments are stored separately according to input
source.
• Depending on the input signal type or "WIDE MODE" setting,
a position setting may not be available.

Game play time

This function displays the elapsed game time so you
do not lose track of the time.
To display the elapsed time, select "GAME" under "AV
MODE" for the input mode of the terminal connected
to the game console before starting the game.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Game play time", and
3
then press ENTER.
Press c / d to select "On", and then press
4
ENTER.
Selected item
On The elapsed time is displayed every 30
minutes when you switch to GAME mode
in external input mode.
Off No adjustment
+ H-pos. adjustment
+ V-pos. adjustment
Return to factory pre-settings
Description
Description
7/8/09 10:05:03 AM 7/8/09 10:05:03 AM