Table of Contents
Advertisement
Maintenance
On the Maintenance page you can export the cameras current configuration, or import
the configuration for a camera. Use the factory default page to reset the IP Camera to
factory default settings if necessary.
Do not import configuration files from different models of cameras.
Note
Set Default –To reset the IP camera to the factory default settings, including the default
IP address, click Set Default. The system will restart after 30 seconds. If you cannot
access the camera menu, you can return the camera to the factory default settings by
holding down the reset button on the camera connection board for 30 seconds. See
Error! Reference source not found. for the button location.
Reboot – To restart the IP camera without changing the current camera settings, Click
Reboot.
Export – You can save the system settings by exporting the configuration file (.bin) to a
specified location for future use. Click Export, then Save, and specify the desired
location.
Upload – To copy an existing configuration file to the IP camera, click Browse, select
the desired configuration file, then click Upload.
65
Advertisement
Table of Contents
