Table of Contents
Advertisement
•
Screwdriver
Installation Steps:
Ensure that the ceiling can support the weight of the dome camera and the
Note
ceiling pole.
1.
Cut a cable access hole in the ceiling.
2.
Attach the ceiling pole to the ceiling with the appropriate screws and screw
anchors (not provided).
3.
Attach the waterproof gasket to the Ceiling Pole.
4.
Thread the cables through the ceiling pole and the top holder
After threading the cables through the tube, block the cable entry hole with the
Note
supplied sponges to prevent insects from entering the tube.
5.
Attach the top holder to the ceiling pole with the supplied screws and washers
and adjust the gasket to the junction of the ceiling pole and the top holder.
6.
Connect the cables to the dome
camera.
7.
Attach the dome to the top holder
and secure them with the supplied
screw.
25
Advertisement
Table of Contents
