2
Press the DISP. button.
The camera will switch to color
input mode, and the display will
alternate between the original
image and the color accent image
(using the previously set color).
3
Aim the camera so that the color you wish to
retain appears at the center of the LCD
monitor and press the
Only one color can be specified.
You can use the
colors that are retained.
-5: Only takes the color that you want to retain.
+5: Also takes colors close to the one that you want to retain.
4
Press the DISP. button.
This completes the setting.
The default Color Accent is green.
You may not obtain the expected results after color input
mode if you use the flash.
The specified Color Accent is retained even if the camera's
power is turned off.
Shooting with Color Swap Mode
Original Color
(Before Swapping)
button.
or
button to specify the range of the
Desired Color
(After Swapping)
43