Display - Acura 2008 TL Navigation System User Manual

Main Menu

Display

There are two screen display modes:
Day Mode Night Mode
Day and Night. The recommended
setting is Auto, which automatically
switches the screen between Day and
Night modes as you turn the headlights
on or off.
You can select Day or Night mode to
override the Auto mode. This is a
useful feature for driver's that like to
use headlights during the day, and want
to temporarily override Night mode.
However, the screen in Day mode will
be extremely bright at night.
Display How setting affects
Mode display mode:
Off Turns off the
navigation display.
Auto Automatically switches
between Day and
(factory
default) Night mode by sensing
if the headlights are on.
Day Stays in Day mode.
Night Stays in Night mode.
2008 TL
To override setting But remember:
while driving:
To "wake up" display, Remember, your route
press NAVI TALK guidance stops when
button, and select the the display is off.
mode by voice.
Override night Remember to adjust the
display - Adjust dash dash brightness back to
brightness to full normal to allow auto
bright. switching by sensing
Override day display - headlights.
Turn on headlights and
ensure the dash
brightness is not at full
bright.
Push and hold the There is no auto Night/
joystick for 10 seconds Day mode change with
(switches to Night the headlights on/off.
mode). You control the setting.
Push and hold the There is no auto Night/
joystick for 10 seconds Day mode change with
(switches to Day
the headlights on/off.
mode). You control the setting.
Navigation System
System Set-up
79