Acura 2008 TL Navigation System User Manual page 126

Main Menu
Frequently Asked Questions
Problem
When I drive at night, the screen is bright and will not switch
to the night display mode. Why?
The daytime map screen is dark like the night display mode,
and it is hard to see. Why?
During the day, I turned on the lights because it started to
rain, but the screen went dark. How can I make it still display
day mode?
How can I input my destination using map coordinates?
How do I change or remove my PIN?
I forget the PIN for Home, or the PIN for personal addresses
(User 1 or User 2). How do I reset it?
CALL is not available on the Calculate route to screen. Why? Your phone is not "paired" to the HFL, or if your phone is "paired," it is in
126 Navigation System
Verify the following: The display mode in Setup is set to Auto, the dash
brightness is not set to maximum, and Map Color in Setup is set to Black
for Night. See Display on page 79.
Verify the following: The display mode in Setup is set to Auto, and Map
Color in Setup is set to White for Day. See Display on page 79.
Adjust the dash brightness to full bright. Remember to set it back to a
medium setting, or at night, the screen will be bright. See Display on
page 79.
The navigation system was not designed for this. However, you can view
the coordinates of an address by touching the vehicle position icon on the
map. See Map Screen Legend on page 52.
Go to "Personal Information" in the Setup screen (second), and select PIN
Number. Select User 1 or User 2 and enter your existing PIN. You then
have the choice to change or remove the PIN. See page 85.
PINs are optional. See information regarding PINs on page 85. Your dealer
can reset the PIN for you.
use; press HFL BACK button.
2008 TL
Solution