Jt Care Steam Wonder 1000 Operating Instructions Manual page 24

Starting Up-Iron
Turn the device on as usual and insert the plug for
the iron hose into the connecting socket on the device.
Wait until the device is warmed up and the red light
on the iron goes out.
Set the thermostat to full output by turning clockwise.
To emit steam, press the button on the iron.
You can activate constant steam by pushing
the locking selector back. To deactivate it push
it back forward.
Left Button is Steam Level 1
Right Button is Steam Level 2
Both Buttons is Steam Level 3
Steam an old towel for around a minute before you
use the iron for the first time.
It's possible that there is still residual grease in
the device left over from production.
In subsequent uses steam a towel for 15 seconds first in
order to vent the device.
24