Advertisement
Feed and Go™ is also not liable for any repercussions of the feeder being used
improperly or if the animal is not compatible with the Feed and Go™ system.
Furthermore, Feed and Go™ is not responsible for overly aggressive behavior
from animals or people that the feeder was not built to withstand.
This Limited Warranty does not cover the cost of returning the Product to
Feed and Go™; this is your responsibility.
No Feed and Go™ reseller, agent, or employee is authorized to make any
modification, extension, or addition to this Limited Warranty. If any term is held to
be illegal or unenforceable, the legality or enforceability of the remaining terms
shall not be affected or impaired.
How to keep Your Feed and Go in tip-top shape (and under warranty):
Use only the power supply provided.
The product must be used indoors. It is neither designed nor tested for use
outdoors, in recreation vehicles, or on boats. Do not use this device near water.
Keep the device clean and free of old food and crumbs by properly cleaning it
after use. To clean your device, unplug all cables and turn off your Feed and Go
device. Only wash the interior tray after fully removing from the feeder and
ensure it is completely dry before putting it back into the Product. Only clean the
outside of the feeder with a soft, slightly damp, lint-free cloth. Avoid getting
moisture in openings. Use a dry cloth for the underside of the opening lid and
any areas around where the tray sits, and ensure that any food or debris is
removed. Do not use window cleaners, household cleaners, aerosol sprays,
solvents, alcohol, ammonia or abrasives to clean your device. Rubbing your
Feed and Go device with an abrasive material will scratch and damage it.
Advertisement
