Advertisement
Please complete and retain for your records:
Serial number ________________________________________
The serial number can be found behind the back flap at the rear of the feeder.
Purchase date ________________________________________
Recap: Important Safety Instructions (it may help to read these aloud to
your pet).
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Keep the device clean and free of old food and crumbs by properly cleaning
it after use. To clean your device, unplug all cables and turn off your Feed
and Go device. Only wash the interior tray after fully removing from the
feeder and ensure it is completely dry before putting it back into the Product.
Only clean the outside of the feeder with a soft, slightly damp, lint-free cloth.
Avoid getting moisture in openings. Use a dry cloth for the underside of the
opening lid and any areas around where the tray sits, and ensure that any
food or debris is removed. Do not use window cleaners, household cleaners,
aerosol sprays, solvents, alcohol, ammonia or abrasives to clean your device.
Rubbing your Feed and Go device with an abrasive material will scratch and
damage it.
Before operating the unit, make sure nothing is obstructing the tray's rotation
path (such as food, debris, etc.)
Do not block any openings or obstruct the tray's rotation path.
Do not install near any heat sources, such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Advertisement
