Product Specifications - Fakir Lucra Instruction Manual

3.PRODUCT SPECIFICATIONS

1 Dust cover
2 Juicer cone
3 Pulp sieve
4 Juice container
5 Drive shaft
6 Base unit
7 Power cord with plug
TECHNICAL SPECIFICATIONS:
Voltage: 230 V~
Power: 85 W
Frequency: 50 Hz
6
1
2
3
4
5
6
7
4.USING METHOD
Open the storage compartment on the
underside of the appliance and take
out the juicer cone .
• Attach the juice container to the drive
shaft of the base unit.
• Place the pulp sieve in the container.
• Fit the juicer cone on to the drive shaft
• Push the spout upwards to ensure that
the extracted juice remains in the
container.
However, the juice may also be
collected straight into a suitable
container placed under the spout:in
this case,the spout must face
downwards.
• Insert the plug into a suitable wall
socket.
• Cut the citus fruit in half and push one
of the halves lightly down on to the
cone with the cut section facing
downwards.
• The drive shalf will start rotating
automatically once pressure is applied
to the cone.The appliance switches off
when pressure on the cone is lifted.
• When processing larger quantities of
fruit,the pulp sieve must be emptied
from time to time as necessary.
• To collect the juice, place a suitable
container under the spout .Push the
spout downwards. The extracted juice
passes now straight into the container.
once the desired amount of juice has
been collected, push the spout