F
If you have a problem . . .
This appendix describes things you can try if you have problems with your MaxiScan 3300
during power-up, configuration and normal operation.
If you can not solve the problem yourself, please contact your UBI representative.
Before you contact your UBI representative . . .
Look in the following checklists if you have any of the following problems:
•
no LEDs
•
no beeps
•
error beeps
•
no transmission
•
incorrect transmission
Setup problems—Checklist
MS/3300/IG/10/E/970831
system connected up correctly
system switched on
correct power-up beep indication—2 beeps
default configuration inhibit after 1 minute option is active—if
you are using a setup sheet, you must switch off / switch on the
MaxiScan 3300 to be able to read configuration codes if the
1-minute configuration timeout has expired
F-1