movistar Wireless USB Adapter Installation Manual page 11

Problem
The router cannot
be connected.
The connection
signal is weak or
unstable.
The IP address
has not been
found.
The wireless
connection is set up
but you do not have
access to the Internet.
* For more information you can consult the "TCP_IP Verification Guidelines" document, which you will find
in the "Documentation" folder on the CD provided.
"Recommendations for wireless networks" document, which you will find in the "Documentation" folder on
the CD provided.
For more advanced and specific information about the Wireless USB Adapter, consult the User Manual
found in electronic format in the "Documentation" folder on the installation CD.
Cause
The router is disabled or is out of
range.
The security key or name of the
configured network (SSID) is
incorrect.
The TCP/IP configuration is
incorrect.
There is interference on the
channel being used.
The router and the adapter are
too far apart.
The router's DHCP service is not
enabled.
The security key is incorrect.
The TCP/IP configuration is
incorrect.
The wireless router is not
correctly configured for
Internet access.
Check that the router is switched on and enabled
and that the network is available.
Check that you have entered the security key
and the network name (SSID) correctly (bear in
mind that they are case-sensitive).
Check the TCP/IP configuration*.
Change the channel used by your access point;
try to use a channel that is not being used
much by the other networks.
Change the position of the adapter in order to
receive a stronger signal**.
Access the router and enable the DHCP server
option*.
Check that you have entered the security key
correctly.
Check that the TCP/IP settings for your
wireless client are correct*.
Check the configuration of your router or
wireless access point.
** For more information you can consult the
11
Solution