Taking Pictures Using The Flash (Supplied); Attaching The Flash - Panasonic Lumix DMC-LX100 Owner's Manual

Taking pictures using the flash (supplied)

Recording mode:
This section describes how to take a picture using the flash (supplied).

Attaching the flash

The hot shoe cover is already attached to the hot shoe at the time of purchase.
Attach the flash to the hot shoe after removing the hot shoe cover.
Removing the hot shoe cover
• Make sure that the Camera [ON/OFF] switch is set to [OFF].
1 Remove the hot shoe cover by pulling it in the
direction indicated by arrow
the direction indicated by arrow
• Be sure to attach the hot shoe cover when the
hot shoe is not in use.
• Keep the hot shoe cover safely after removing it
so that you do not lose it. (→11)
Attaching the flash
1 Turn off the flash
2 Firmly insert the flash into the hot shoe of this unit
until it clicks
• Set the Camera [ON/OFF] switch to [ON] and turn
on the flash when you take a picture.
●
Do not carry the camera holding by the flash when the
flash is mounted on the camera.
■
Removing the flash
Turn off the camera and the flash
Press and hold the lock release button and pull the flash in the direction
indicated by the arrow to detach the flash
• When detaching the flash, do so slowly and carefully.
• Attach the hot shoe cover to the hot shoe of the camera.
• Store the detached flash in its soft case.
Advanced Recording Functions
while pressing it in
Lock release button
Hot shoe
Flash [ON/OFF] switch
SQT0359 (ENG)
59