Panasonic Lumix DMC-LX100 Owner's Manual page 71

3 Select the PC you want to connect to
• If the PC you want to connect to is not displayed, select [Manual Input],
then enter the computer name (for Mac, enter the NetBIOS name).
4 Select the folder you want to send to
• When the connection is established, the confirmation screen for the
transmission setting is displayed. Check the setting and press [MENU/
SET]. To change the send setting, press [DISP.] button.
5
Perform the camera operation (specific to your purpose)
■
[Send Images While Recording]
Take still pictures
• To change the setting or disconnect, press [Wi-Fi] button. (→61)
You cannot change the settings while sending still pictures. Wait until
sending is complete.
(You can also close the connection by pressing
→ [Wi-Fi] → [Wi-Fi Function] → [Yes].)
■
[Send Images Stored in the Camera]
Select [Single Select] or [Multi Select] to select the picture that you
want to send
• A confirmation screen is displayed. If you select [Yes], the operation is
executed.
• To change the send setting, press [DISP.] button.
• To close the connection, select [Exit].
●
Folders sorted by the sent date are created in the specified folder, and
pictures are saved in those folders.
●
If the screen for a user account and password entry appears, enter the one
you set on your PC.
●
If the computer name (for Mac, the NetBIOS name) contains spaces, etc., the
name may not be properly recognized. If you cannot connect, we recommend
changing the computer name (for Mac, the NetBIOS name) to a combination
of 15 or less alphanumeric characters only.
Wi-Fi
→
[Setup]
SQT0359 (ENG)
71