Frame Sizes; Power Supplies - SoundCraft SM12 User Manual

Frame Sizes

Power Supplies

Lamps
2
The SM12 is a 12 bus dedicated monitor console to complement the Vienna and
Europa FOH desks.
The key features of the SM12 are:
•
12 mono sends
•
stereo send
•
PRE/POST fade switching on each pair of sends and the stereo send
•
4 programmable mute groups
•
4 band sweep EQ
•
100mm linear faders on all inputs and outputs
•
sophisticated solo system with autocancel, central global clear and
switchable input priority.
•
metering for all inputs and outputs
•
external inputs for all group and stereo mix buses, with level control and
listen facility
•
balanced inserts on all outputs with bypass switching, and pre-insert solo
facility
•
balanced inserts on all inputs
The SM12 is available in three frames sizes, 32, 40 and 48 channels. The consoles
are configured, from left to right:
•
inputs 1 - 24
•
master
•
groups 1 - 12 (6 modules)
•
inputs 25 - 32 (32 channel)
•
inputs 25 - 40 (40 channel)
•
inputs 25 - 48 (48 channel)
All frame sizes use the PSM300 PSU. Connection to the console is via a 10-way
SRC connector below inputs 21-24. The console rear panel also carries a ground
binding post.
Two 4-pin XLR connectors for lamps are fitted to all frame sizes - one at either end
of the console on the end trim. These are suitable for Littlite or similar 12V lamps
taking up to 330mA each.
Introduction