Stereo Mix - SoundCraft SM12 User Manual

Input Module
The Frequency Response Curves of the Equaliser
dB
LF Section
20.0
15.0
10.0
5.0
0.0
-5.0
-10.0
-15.0
-20.0
20 100 1k
Frequency/Hz
LF EQ
dB
LMF Section
20.0
15.0
10.0
5.0
0.0
-5.0
-10.0
-15.0
-20.0
20 100 1k
Frequency/Hz
LMF EQ
Groups
8
The input signal is sent to the group 1 - 12 buses via individual Level Controls.
These have unity gain when fully clockwise.
The group sends are switched pre- or post-fader in pairs by the PRE buttons. The
pre-fade signal may be sourced either pre-mute or post-mute, and selection is done
in three blocks of four sends, using push-on jumpers.
The factory default is post-mute.

Stereo Mix

9
The post-fader signal is sent to the stereo mix bus via the L/R (level) control.
The mix bus send may be set pre- or post-fade by the PRE switch. The pre-fade
signal may be sourced pre- or post-mute using push-on jumpers.
The factory default is post-mute.
10
The PAN control allows the channel signal to be positioned within the stereo
mix. Rotation fully anticlockwise sends the signal to the Left bus, rotation
clockwise sends the signal to the Right bus. There is a 4.5dB drop in the centre
position.
dB
HF Section
20.0
15.0
10.0
5.0
0.0
-5.0
-10.0
-15.0
-20.0
10k 20 100
HF EQ
dB
HMF Section
20.0
15.0
10.0
5.0
0.0
-5.0
-10.0
-15.0
-20.0
10k 20k 20 100
HMF EQ
1k 10k 20k
Frequency/Hz
1k 10k 20k
Frequency/Hz
19