Your Quantum Blast - Quantum Blast Owner's Manual

Your Quantum Blast has two main assemblies: the seat and the power base. See figures 2 and 3. There are a wide range of
seating options for the Blast, as well as custom configurations. Commonly, the seating assembly contains a seatback, arm-
rests, joystick, and footrest mounts. Your Blast may feature a tilt or recline seating system, alternate joystick mount, or a
number of other specialty features to further enhance your mobility. For information on your seating system, refer to the
ownerís manual that accompanies the seating system.
The power base assembly of the Blast consists of two casters wheels, two drive wheels (see figure 2 and 3), two anti-tip
wheels (see figure 3), two drive motors (see figures 7 and 8), two batteries, an electronics controller, and a battery charger
(see figure 4). The Remote Plus controller is standard equipment on the Quantum Blast.
SEAT
ASSEMBLY
POWER
BASE
ASSEMBLY
DRIVE WHEEL
MOTOR/BRAKE ASSEMBLY
Fig 2. Blast Front View
BLAST/REV D/OCTOBER 2002
Y
SEATBACK
7

YOUR QUANTUM BLAST

Q
OUR UANTUM
B
LAST
JOYSTICK
REMOTE PLUS
KEYPAD
ARMRESTS
FOOTREST
MOUNTS
(SWING-AWAY
FOOTRESTS)
CASTER
WHEELS
Quantum Blast