Overview Of Unit A/B Controls; System Connection - Ematic ED929D User Manual

Main Unit Controls

Overview of Unit A/B Controls

Unit A
ON OFF
2
1
SD
15
3 4 5 6 7 8
1. Open knob
2. Power ON/OFF switch
3. SETUP button
4. MODE button
( )/ ( )/ ( )/ ( )
5.
6. OK button
7. PLAY/PAUSE button
8. STOP button
Unit B
ON OFF
2
1
15
3 4 5 6 7 8
1. Open knob
2. Power ON/OFF switch
3. SETUP button
4. MODE button
( )/ ( )/ ( )/ ( )
5.
6. OK button
7. PLAY/PAUSE button
8. STOP button
9
10
11
12
13
CLOSE
15 16
9. DC IN 9-12V
10. AV OUT
11. Earphone jack
12. Volume knob
13. SD card slot
14. USB Port
15. Bracket
16. Rating label position
9
10
11
12
13
CLOSE
15 16
9. DC IN 9-12V
10. AV IN/OUT
11. Earphone jack
12. Volume knob
13. SD card slot
14. USB Port
15. Bracket
16. Rating label position
4

System Connection

Powering and installation
Plug one end of the AC/DC power adaptor into the DC IN 9-12V jack on the right of the
unit, then plug the other end into the AC power receptacle. Please refer to the following
illustration.
SD AV OUT
SD AV IN/OUT
If using car cigarette lighter adaptor to connect to the power:
Plug one end of the cigarette lighter adaptor into the DC IN 9-12V jack on the unit, plug
the other end into the car cigarette lighter socket.See illustration below.
SD AV OUT
SD AV IN/OUT
Note:
1.Car cigarette lighter adaptor is not recommended to recharge the battery.
2.Car cigarette light adaptor can only be used when the car power supply is 9-12V.
3.The mains plug is used as the disconnect device, the disconnect device should remain
readily operable.
Car cigar ette lighter
5