Table of Contents
Advertisement
7.
Under WEP/WPA Encryption, select the Authentication
Type for your wireless network. Using WPA2 provides the
most secure connection.
8.
The remaining fields change depending on the selected
authentication type. Refer to the SonicOS Administrator's
Guide for details on the multiple wireless security
authentication types available.
9.
Optionally, under ACL Enforcement, select Enable MAC
Filter List and choose an address object group from the
Allow List or Deny List to allow or deny traffic to and from
all devices with MAC addresses in the group.
Radio 0/1 (5Ghz/2.4GHz) Advanced Tabs
Configure the advanced radio settings for each 802.11n radio.
For most 802.11n advanced options, the default settings give
optimum performance. For a full description of the fields on this
tab, see the SonicOS Administrator's Guide. When you are
finished, click OK.
Note: If one or more of your SonicPoints were connected
to the Dell SonicWALL appliance before a
provisioning profile was created, the default profile
is used. To re-apply new provisioning profile settings,
delete all devices from the SonicPoint-Ns table on the
SonicPoint > SonicPoints page. This action reboots
the devices so they may assume the correct assigned
profile.
Configuring Provisioning Profiles |
17
Advertisement
Chapters
Table of Contents
