1. Manuals
  2. Brands
  3. Aplex Manuals
  4. Motherboard
  5. ARCHMI-716(P)
  6. User manual

Aplex ARCHMI-716(P) User Manual

Archmi series
Hide thumbs
Table of Contents

Advertisement

Quick Links

ARCHMI-7XX
(SBC-7106A)

User Manual

Release Date
_
Revision
Dec. 2014
V1.1
® 2014 Aplex Technology, Inc.
All Rights Reserved.
Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail:
aplex@aplex.com.tw
URL:
www.aplex.com.tw
ARCHMI-7XX (SBC-7106A) User Manual
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ARCHMI-716(P) and is the answer not in the manual?

Questions and answers

Related Manuals for Aplex ARCHMI-716(P)

Summary of Contents for Aplex ARCHMI-716(P)

  • Page 1: User Manual

    (SBC-7106A) User Manual Release Date Revision Dec. 2014 V1.1 ® 2014 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan Aplex Technology, Inc. 15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail: aplex@aplex.com.tw...

  • Page 2: Warning!/Avertissement

    Disclaimer This information in this document is subject to change without notice. In no event shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or consequential, arising from either the use or misuse of information in this document or in any related materials.

  • Page 3: Packing List

    Packing List Accessories (as ticked) included in this package are: □ Adaptor □ Driver & manual CD disc □ Other.___________________(please specify) Safety Precautions Follow the messages below to prevent your systems from damage: ◆ Avoid your system from static electricity on all occasions. ◆...

  • Page 4: Table Of Contents

    Table of Contents______________________ Warning!/Avertissement!........…………………………….……..….2 Caution/Precaution/Disclaimer……..……………………………………………………2 Packing List…………………………………….……………………………………………..3 Safety Precautions/Consignes de sécurité……………….……………………………..3 Chapter 1 Getting Started 1.1 Features………………………………………...…………………………..6 1.2 Specifications……………………………………………………………….6 1.3 Dimensions……………………………………………………………….…9 1.4 Brief Description of ARCHMI-7XX………………………………….…...13 1.5 Installation of HDD ………………………………...…………………..…17 Chapter 2 Hardware 2.1 Mainboard Introduction……………………...…………………………..19 2.2 Specifications………………………………………………………………19 2.3 Jumpers and Connectors Location……………………………………...22 2.4 Jumpers Setting and Connectors…………………………………..……23 Chapter 3 BIOS Setup...
  • Page 5 Chapter 5 Touch Screen Installation 5.1 Windows XP/2003/Vista/WIN7 Universal Driver Installation for PenMount 6000 Series...……………………………………………………...80 5.1.1 Installing Software (Resistive Touch)………………………………..80 5.1.2 Installing Software (Projected Capacitive)……………………………84 5.2 Software Functions………………………………………………………..90 5.2.1 Software Functions (Resistive Touch)…………………………………90 5.2.2 Software Functions (Projected Capacitive)…………………….…...100 Figures Figure 1.1: Dimensions of ARCHMI-716……..…………………………..9 Figure 1.2: Dimensions of ARCHMI-717…………………………………..10 Figure 1.3: Dimensions of ARCHMI-718…………………………………….11 Figure 1.4: Dimensions of ARCHMI-721…………………………………….12...

  • Page 6: Getting Started

    Chapter 1 Getting Started 1.1 Features  15.6”/17”/18.5”/21.5” Industrial Compact Size Panel PC  Flat front panel touch screen  Fanless design  Intel Atom D2550 1.86GHz CPU built-in  Onboard 4GB DDR III 800 MHz  9~36VDC wide-ranging power input ...
  • Page 7 Display Type 15.6” 17” 18.5” 21.5” Max. Resolution 1366 x 768 1280 x 1024 1366 x 768 1920 x 1080 Max. Color 16.7M 16.7M 16.7M 16.7M Luminance (cd/m²) Contrast Ratio 500 : 1 1000 : 1 1000 : 1 3000 : 1 Viewing 160 (H) / 160 (V) 170 (H) / 160 (V)
  • Page 8 ** Please be notice. Due to the limitation for Intel N2000/D2000 EMGD driver, therefore ARCHMI will have some limitation under XP. The Intel EMGD driver version is v1.15 It will have the unknown device under device management due to not support the Intel HDA device (refer to the photo below) It will need install the correct driver by LCD panel size/resolution, totally four version : 800*480, 800*600, 1024*768(18bit), 1024*768(24bit)

  • Page 9: Dimensions

    1.3 Dimensions Figure 1.1: Dimensions of ARCHMI-716 ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 10: Figure 1.2: Dimensions Of Archmi-717

    Figure 1.2: Dimensions of ARCHMI-717 ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 11: Figure 1.3: Dimensions Of Archmi-718

    Figure 1.3: Dimensions of ARCHMI-718 ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 12: Figure 1.4: Dimensions Of Archmi-721

    Figure 1.4: Dimensions of ARCHMI-721 ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 13: Brief Description Of Archmi-7Xx

    1.4 Brief Description of ARCHMI-7XX There are 15.6”, 17”, 18.5” and 21.5” Industrial Compact Size Panel PC in ARCHMI series, which comes with flat front panel touch screen and fanless design. It is powered by Intel Atom D2550 1.8GHz CPU built-in, 4GB DDR III 800 MHz. ARCHMI series is 9~36VDC wide-ranging power input and IP65 compliant front panel.

  • Page 14: Figure 1.7: Front View Of Archmi-717

    Figure 1.7: Front View of ARCHMI-717 Figure 1.8: Rear View of ARCHMI -717 ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 15: Figure 1.9: Front View Of Archmi-718

    Figure 1.9: Front View of ARCHMI-718 Figure 1.10: Rear View of ARCHMI-718 ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 16: Figure 1.11: Front View Of Archmi-721

    Figure 1.11: Front View of ARCHMI-721 Figure 1.12: Rear View of ARCHMI-721 ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 17: Installation Of Hdd

    1.5 Installation of HDD Step 1 There are 2 screws to deal with when enclosing or removing the chassis. Gently remove 2 screws. Step 2 You can put or remove HDD into the machine by pulling the HDD bracket. Step 3 You can remove HDD by unscrewing 4 screws in the HDD bracket.
  • Page 18 Step 4 There is a SD hole in the side of machine. You can replace SD card from there ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 19: Chapter 2 Hardware

    Chapter 2 Hardware 2.1 Mainboard Introduction SBC-7106A is a 4" industrial motherboard developed on the basis of Intel Cedarview-M/D Processors and NM10, which provides abundant peripheral interfaces to meet the needs of different customers. Also, it features dual GbE ports, 3-COM ports and one Mini PCIE configuration, one VGA port, one HDMI port, one LVDS interface.
  • Page 20 1 x SD Socket (USB to SD) Ethernet 2 x PCIe Gbe LAN by Intel 82574L 2 x USB 2.0 (type A)stack ports (USB4/USB5) 2 x USB 2.0 Pin header for CN3 (USB2/USB3) 1 x USB 2.0 Pin header for CN1 (USB0,option) 1 x USB 2.0 Pin header for CN2 (USB1) 1 x USB 2.0 for MPCIE1 (USB7) 1 x RS232/RS422/RS485 port, DB9 connector for external...

  • Page 21: Figure 2.1: Mainboard Dimensions

    2 x RJ45 GbE LAN Ports 1 x HDMI Port 1 x Stack audio Jack (Line out) Software programmable 1 – 255 second by Super I/O Watchdog Timer Operating: -20℃ to 70℃ Temperature Storage: -40℃ to 85℃ Humidity 5% - 95%, non-condensing, operating Power 12V /0.95A (Intel Atom N2600...

  • Page 22: Jumpers And Connectors Location

    2.3 Jumpers and Connectors Location Figure 2.2: Jumpers and Connectors Location- Board Top Figure 2.3: Jumpers and Connectors Location- Board Bottom ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 23: Jumpers Setting And Connectors

    2.4 Jumpers Setting and Connectors 1. CPU1: (FCBGA559), onboard Intel Intel Cedarview-M/D Processors Model SBC-7106A-D25-4G D2550 D2550（option） SBC-7106A-D25P-4G N2600（option） SBC-7106A-N26-2G 2. H3/H4/H5/H6: CPU1 and U53 Heat Sink Screw holes, four screw holes for intel D2550 (or N2600) and NM10 Heat Sink assemble. 3.
  • Page 24 Procedures of CMOS clear: a) Turn off the system and unplug the power cord from the power outlet. b) To clear the CMOS settings, use the jumper cap to close pins 1 and 2 for about 3 seconds then reinstall the jumper clip back to pins open. c) Power on the system again.
  • Page 25 9. CPU_FAN1: (2.54mm Pitch 1x3 Pin Header),Fan connector, cooling fans can be connected directly for use. You may set the rotation condition of cooling fan in menu of BIOS CMOS Setup. Pin# Signal Name Ground Rotation detection Note: Output power of cooling fan must be limited under 5W. Model CPU_FAN1 SBC-7106A-D25...
  • Page 26 11. HDMI1: (HDMI 19P Connector), High Definition Multimedia Interface connector. 12. JP6: (2.0mm Pitch 2x2 Pin Header), LVDS jumper setting. Function (CN1) Pin1-Pin2（Close） Single channel LVDS Pin1-Pin2（Open） Dual channel LVDS (Default) Pin3-Pin4（Close） 8/24 bit (Default) Pin3-Pin4（Open） 6/18 bit 13. U66: AT24C02-DIP8,The EEPROM IC（U66）is the set of LVDS resolution.
  • Page 27 Ground Ground BKLT_EN_OUT BKLT_CTRL Note: Pin6 is backlight control signal, support DC or PWM mode, mode select at BIOS CMOS menu. 15. CN1: (1.25mm Pitch 2x20 Connector, DF13A-40DP-1.25V), For 18/24-bit LVDS2 output connector, Fully supported by Parad PS8625(DP to LVDS), the interface features dual channel 24-bit output.
  • Page 28 JP1 Pin# Function Close 1-2 COM1 RI (Ring Indicator) (default) Close 3-4 COM1 Pin9:DC+5V (option) Close 5-6 COM1 Pin9:DC+12V (option) 17. S_232: (Switch),COM1 jumper setting, it provides selectable RS232 or RS422 or RS485 serial signal output. Function S_232 Pin# RS232 (Default) Pin1, Pin2, Pin3, Pin4 RS422...
  • Page 29 RS232 (Default): Pin# Signal Name DCD# (Data Carrier Detect) RXD (Received Data) TXD (Transmit Data) DTR (Data Terminal Ready) Ground DSR (Data Set Ready) RTS (Request To Send) CTS (Clear To Send) JP1 select Setting (RI/5V/12V) BIOS Setup： Advanced/W83627UHG Super IO Configuration/Serial Port 1 Configuration【RS-232】...
  • Page 30 BIOS Setup： Advanced/W83627UHG Super IO Configuration/Serial Port 1 Configuration【RS-485】 20. JP2: (2.0mm Pitch 2x3 Pin Header),COM2 jumper setting, pin 1~6 are used to select signal out of pin 9 of COM2 port. JP2 Pin# Function Close 1-2 COM2 RI (Ring Indicator) (default) COM2 Pin9：DC+5V (option) Close 3-4...
  • Page 31 23. TCH1: (2.0mm Pitch 1x6 wafer Pin Header), internal Touch controller connector. Pin# Signal Name SENSE GND_EARCH 24. LED1, LED2, LED3 (option): LED1: LED STATUS. Green LED for Motherboard Power status. LED2: LED STATUS. Green LED for Motherboard Standby Power Good status. LED3: LED STATUS.
  • Page 32 with USB2.0 and LPC and SMBUS and PCIe signal. MPCIe card size is 30x30mm. 30. H1/H2: MPCIE1 SCREW HOLES, H1and H2 for mini PCIE card (30mmx30mm) assemble. 31. AUDIO: (2.0mm Pitch 2X6 Pin Header), Front Audio, An onboard Realtek ALC662 codec is used to provide high-quality audio I/O ports.
  • Page 33 34. LAN1/LAN2: LAN1/LAN2: (RJ45 Connector), Rear LAN port, Two standard 10/100/1000M RJ-45 Ethernet ports are provided. Used intel 82574L chipset, LINK LED (green) and ACTIVE LED (yellow) respectively located at the left-hand and right-hand side of the Ethernet port indicate the activity and transmission state of LAN. 35.
  • Page 34 two USB 2.0,one PS/2 mouse，one PS/2 keyboard, two uart,one PCIe x1,one SMbus. connected to the TB-528 riser Card. Function Signal Name Pin# Signal Name Function 5V_S5_USB 5V_S5_USB 5V_S5_USB 5V_S5_USB USB23_OC CLKREQPSON_ATX- USB2 USB2_N USB2_P USB2 USB3 USB3_N USB3_P USB3 Ground Ground PS/2 MS PS2_MSCLK...
  • Page 35 CN3： (1.27mm Pitch 2X30 Pin Header),connect to SBC-7106A CN3 pin Header. M-PCIE1： (Socket 52Pin),mini PCIe socket, it is located at the top, it supports mini PCIe devices with USB2.0(USB2),Smbus,SIM and PCIe signal. MPCIe card size is 30x30mm or 30x50.95mm. Signal Name Function support PCIe 1X USB2.0 (USB2)
  • Page 36 Pin# Signal Name KBDATA MSDATA Ground KBCLK MSCLK GPIO1： (2.0mm Pitch 2x5 Pin Header),General-purpose input/output port, it provides a group of self-programming interfaces to customers for flexible use. Signal Name Pin# Pin# Signal Name Ground SMB_DATA_R SMB_CLK_R ICH_GPIO13_IN1 ICH_GPIO24_IN2 ICH_GPIO26_IN3 ICH_GPIO27_IN4 USB_23：...
  • Page 37 Close 3-4 COM5 Pin9=+5V (option) Close 5-6 COM5 Pin9=+12V (option) COM5： (Type DB9),serial port, standard DB9 serial port is provided to make a direct connection to serial devices. COM5 port is controlled by pins No.1~6 of JP5,select output Signal RI or 5V or 12v, For details, please refer to description of JP3.
  • Page 38 Pin# Signal Name DCD# (Data Carrier Detect) RXD (Received Data) TXD (Transmit Data) DTR (Data Terminal Ready) Ground DSR (Data Set Ready) RTS (Request To Send) CTS (Clear To Send) JP6 Setting: Pin1-2 : RI (Ring Indicator) (default) Pin3-4 : 5V Standby power (option) Pin5-6:12V Standby power (option)
  • Page 39 CN3： (1.27mm Pitch 2X30 Pin Header),connect to SBC-7106A CN3 pin Header. LED1： Mini PCIe devices LED Status. PS2： (2.0mm Pitch 1X6 Pin Wafer), PS/2 keyboard and mouse port, the port can be connected to PS/2 keyboard or mouse via a dedicated cable for direct used. Pin# Signal Name KBDATA...
  • Page 40 ICH_GPIO24_IN2 ICH_GPIO26_IN3 ICH_GPIO27_IN4 USB_23： (2.0mm Pitch 2x5 Pin Header) ,Front USB connector, it provides one USB port via a dedicated USB cable, speed up to 480Mb/s. Signal Name Pin# Pin# Signal Name 5V_USB23 5V_USB23 USB3_N USB2_N USB3_P USB2_P Ground Ground Ground Note: Before connection, make sure that pinout of the USB Cable is in accordance with that of...
  • Page 41 DTR (Data Terminal Ready) Ground DSR (Data Set Ready) RTS (Request To Send) CTS (Clear To Send) JP5 Setting: Pin1-2 : RI (Ring Indicator) (default) Pin3-4 : 5V Standby power (option) Pin5-6:12V Standby power (option) JP6： (2.0mm Pitch 2x3 Pin Header),COM6 setting jumper, pin 1~6 are used to select signal out of pin 9 of COM6 port.
  • Page 42 COM_6（option）： (2.0mm Pitch 2X5 Pin Header),COM6 Port, up to one standard RS232 port are provided. They can be used directly via COM cable connection. Signal Name Pin# Pin# Signal Name Ground JP6 Setting: RI/5V/12V 40. TB-528C1U2P1/TB-528C1U2 (option): SBC-7106A Riser Card,TB-528C1U2P1 CN3 connect to SBC-7106A CN3 pin Header. TB-528C1U2P1 Top：...
  • Page 43 H1/H2: MPCIE1 SCREW HOLES, H2 for mini PCIE card (30mmx30mm) assemble. H1 for mini PCIE card (30mmx50.95mm) assemble. LED1： Mini PCIe devices LED Status. SIM1（option）： (SIM Socket 6 Pin), Support SIM Card devices. PS_ON1： (2.0mm Pitch 1X2 Pin Wafer), ATX Power and Auto Power on jumper setting. PS_ON Mode Close 1-2...
  • Page 44 Signal Name Pin# Pin# Signal Name Ground SMB_DATA_R SMB_CLK_R ICH_GPIO13_IN1 ICH_GPIO24_IN2 ICH_GPIO26_IN3 ICH_GPIO27_IN4 USB23： (Double stack USB type A), Rear USB connector, it provides up to 2 USB2.0 ports, speed up to 480Mb/s. USB_23（option）： (2.0mm Pitch 2x5 Pin Header) ,Front USB connector, it provides one USB port via a dedicated USB cable, speed up to 480Mb/s.
  • Page 45 COM5： (Type DB9),serial port, standard DB9 serial port is provided to make a direct connection to serial devices. COM5 port is controlled by pins No.1~6 of JP5,select output Signal RI or 5V or 12v, For details, please refer to description of JP3. Pin# Signal Name DCD# (Data Carrier Detect)
  • Page 46 Pin# Signal Name DCD# (Data Carrier Detect) RXD (Received Data) TXD (Transmit Data) DTR (Data Terminal Ready) Ground DSR (Data Set Ready) RTS (Request To Send) CTS (Clear To Send) JP6 Setting: Pin1-2 : RI (Ring Indicator) (default) Pin3-4 : 5V Standby power (option) Pin5-6:12V Standby power (option)
  • Page 47 CN3： (1.27mm Pitch 2X30 Pin Header),connect to SBC-7106A CN3 pin Header. M-PCIE1： (Socket 52Pin),mini PCIe socket, it is located at the top, it supports mini PCIe devices with Smbus,USB2.0,SIM and PCIe signal. MPCIe card size is 30x30mm or 30x50.95mm. Signal Name Function support PCIe 1X USB2.0 (USB2)
  • Page 48 PS2： (2.0mm Pitch 1X6 Pin Wafer), PS/2 keyboard and mouse port, the port can be connected to PS/2 keyboard or mouse via a dedicated cable for direct used. Pin# Signal Name KBDATA MSDATA Ground KBCLK MSCLK USB_IN（option）： (2.0mm Pitch 2x5 Pin Header) ,Front USB connector, it provides two USB port via a dedicated USB cable, speed up to 480Mb/s.
  • Page 49 JP3 Pin# Function Close 1-2 RI (Ring Indicator) (default) Close 3-4 COM6 Pin9=+5V (option) Close 5-6 COM6 Pin9=+12V (option) COM6： (2.0mm Pitch 2X5 Pin Header),COM6 Port, up to one standard RS232 port are provided. They can be used directly via COM cable connection. Signal Name Pin# Pin#...
  • Page 50 JP1： (2.0mm Pitch 1x2 Pin Header), Reserve. JP2： (2.0mm Pitch 1x2 Pin Header), Reserve. CAN1/CAN2： (3.5mm Pitch 1x10 Pin connector), it provides two CAN-bus Interface. Pin# Chann Signal Function Name CANL2 CAN bus Signal L Terminal resistor R-(internally connected to CANL2) CAN2 Shield cable (FG) Terminal resistor R+( internally connected to CANH2)
  • Page 51 CN3： (1.27mm Pitch 2X30 Pin Header),connect to SBC-7106A CN3 pin Header. USB23： (Double stack USB type A), Rear USB connector, it provides up to 2 USB2.0 ports, speed up to 480Mb/s. ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 52: Chapter 3 Bios Setup

    Chapter 3 BIOS Setup 3.1 Operations after POST Screen After CMOS discharge or BIOS flashing operation,.Press [Delete] key to enter CMOS Setup. After optimizing and exiting CMOS Setup, the POST screen displayed for the first time is as follows and includes basic information on BIOS, CPU, memory, and storage devices. 3.2 BIOS Setup Utility Press [Delete] key to enter BIOS Setup utility during POST, and then a main menu containing system summary information will appear.

  • Page 53: Main Settings

    3.3 Main Settings ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 54: Advanced Settings

    System Time: Set the system time, the time format is: Hour : 0 to 23 Minute : 0 to 59 Second : 0 to 59 System Date: Set the system date, the date format is: Note that the ‘Day’ automatically changes when you set the date. Day: Month: 01 to 12 Date:...
  • Page 55 [32 PCI Bus Clocks] [64 PCI Bus Clocks] [96 PCI Bus Clocks] [128 PCI Bus Clocks] [160 PCI Bus Clocks] [192 PCI Bus Clocks] [224 PCI Bus Clocks] [248 PCI Bus Clocks] VGA Palette Snoop: [Disabled] [Enabled] PERR# Generation: [Disabled] [Enabled] SERR# Generation: [Disabled]...
  • Page 56 S3 Video Repost: [Disabled] [Enabled] 3.4.3 CPU Configuration Processer Type Intel(R) Atom™ CPU D2550 EMT64 Supported Processor Speed 1865 MHz System Bus Speed 533MHz Ratio Status Actual Ratio System Bus Speed 533 MHz Processor Stepping 30661 Microcode Revision L1 Cache RAM 2x56 k L2 Cache RAM 2x512 k...
  • Page 57 Active Trip Point Hi [71C] Passive Trip Point [95] Passive TC1 Value Passive TC2 Value Passive TSP Value 3.4.5 IDE Configuration SATA Port0 Not Present SATA Port1 Not Present SATA Controller(S): [Enabled] [Disabled] Configure SATA as: [IDE] [AHCI] Misc Configuration for hard disk 3.4.6 USB Configuration USB Configuration USB Devices:...
  • Page 58 [Auto] [Manual] 3.4.7 W83627UHG Super IO Configuration W83627UHG Super IO ch W83627UHG Serial Port 1 Configuration UART Mode Selection： [RS-232] [RS-485] [RS-422] Serial Port 2 Configuration Serial Port 3 Configuration UART Mode Selection： [RS-485] [RS-422] Serial Port 4 Configuration Serial Port 5 Configuration Serial Port 6 Configuration 3.4.8 W83627UHG HW Monitor PC Health Status...
  • Page 59 [Disabled] Console Redirection Settings Serial Port for Out-of-Band Management/ Windows Emergency Management Services (EMS) Console Redirection [Disabled] [Enabled] Console Redirection Settings 3.4.10 PPM Configuration PPM Configuration EIST: [Enabled] [Disabled] CPU C state Report [Enabled] [Disabled] Enhanced C state [Enabled] [Disabled] CPU Hard C4E [Enabled] [Disabled]...

  • Page 60: Chipset Settings

    3.5 Chipset Settings 3.5.1 Host Bridge ►Memory Frequency and Timing ►Intel IGD Configuration ******* Memory Information ******* Memory Frequency 1067 MHz(DDR3) Total Memory 4096 MB DIMM#0 Not Present DIMM#1 4096 MB Memory Frequency and Timing MRC Fast Boot [Enabled] [Disabled] Max TOLUD [Dynamic] [1GB]...
  • Page 61 [1.5GB] [1.75GB] [2GB] [2.25GB] [2.5GB] [2.75GB] [3GB] [3.25GB] Intel IGD Configuration IGFX – Boot Type [VBIOS Default] [VGA] [HDMI] [LVDS] LCD Panel Type [VBIOS Default] Panel Scaling [Auto] [Force Scaling] [off] [Maintain Aspect Ratio] Active LFP [LVDS] [No LVDS] IGD Clock Source [External Clock] [Internal Clock] Fixed Graphics Memory...
  • Page 62 [Negative] Back light Control Lev [Level 8] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5] [Level 6] [Level 7] [Level 9] [Level 10] [Level 11] [Level 12] [Level 13] [Level 14] [Level 15] 3.5.2 South Bridge TPT Devices PCI Express Root Port 0 PCI Express Root Port 1 PCI Express Root Port 2...

  • Page 63: Boot Settings

    3.6 Boot Settings Setup Prompt Timeout Bootup Numlock State [On] [off] Quiet Boot [Disabled] [Enabled] Fast Boot [Enabled] [Disabled] Skip VGA ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 64 [Enabled] [Disabled] Skip USB [Disabled] [Enabled] Skip PS2 [Disabled] [Enabled] CSM16 Module Version 07.69 Gatea20 Active [Upon Request] [Always] Option ROM Messages [Force BIOS] [Keep Current] Interrupt 19 Capture [Immediate] [Postponed] Boot Option #1 Boot Option #2 …… Sets the system boot order [SATA PM:*** …...

  • Page 65: Security Settings

    [Do not Launch] [UEFI only] Launch Video OpROM po [Legacy only] [Do not Launch] [UEFI only] Other PCI device ROM [UEFI OpROM] [Legacy OpROM] 3.7 Security Settings 3.7.1 Administrator Password 3.7.2 User Password ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 66: Save & Exit Settings

    Type the password with up to 20 characters and then press Enter key. This will clear all previously typed CMOS passwords. You will be requested to confirm the password. Type the password again and press Enter key. You may press Esc key to abandon password entry operation.
  • Page 67 Save & Exit Setup save Configuration and exit ? [Yes] [No] Discard Changes and Ext Exit Without Saving Quit without saving? [Yes] [No] Save Changes and Reset Save & reset Save Configuration and reset? [Yes] [No] Discard Changes and Reset Reset Without Saving Reset without saving? [Yes] [No]...

  • Page 68: Chapter 4 Installation Of Drivers

    Chapter 4 Installation of Drivers This chapter describes the installation procedures for software and drivers under the windows 7. The software and drivers are included with the motherboard. The contents include Intel chipset driver, VGA driver, LAN drivers, Audio driver Installation instructions are given below. Important Note: After installing your Windows operating system, you must install first the Intel Chipset Software Installation Utility before proceeding with the installation of...

  • Page 69: Intel Chipset Driver

    4.1 Intel Chipset Driver To install the Intel chipset driver, please follow the steps below. Step 1. Select Intel (R) Chipset NM10 Express from the list Step 2. Click Next to setup program. ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 70 Step 3. Read the license agreement. Click Yes to accept all of the terms of the license agreement. Step 4. Click Next to continue. ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 71 Step 5. Click Next. Step 6. Select Yes, I want to restart this computer now. Click Finish, then remove any installation media from the drives. ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 72: Intel Graphics Media Accelerator Driver

    4.2 Intel Graphics Media Accelerator Driver To install the VGA drivers, follow the steps below to proceed with the installation. Step 1.Select Intel(R) VGA Chipset Driver. Step 2. Click Automatically run WinSAT and enable the Windows Aero desktop theme(if supported). Click Next. ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 73 Step 3. Read license agreement. Click Yes. Step 4. Click Next. ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 74 Step 5. Click Next. Step 6. To restart the computer, select Yes, I want to restart this computer now. Then click Finish. ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 75: Intel (R) Network Adapter

    4.3 Intel (R) Network Adapter To install the Intel (R) Network Adapter device driver, please follow the steps below. Step 1. Select LAN Driver. Step 2. Select ARCHMI-16”~21”. ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 76 Step 3. Click Next to Continue. Step 4. Read license agreement. Click I accept the terms in the license agreement. Click Next ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 77 Step 5. Click Advanced Network Services. Then click Next to Continue. Step 6. Click Install to begin the installation. ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 78: Realtek Alc662 Hd Audio Driver Installation

    Step 7. Click Finish to exit the wizard. 4.4 Realtek ALC662 HD Audio Codec Driver Installation To install the Realtek ALC662 HD Audio Codec Driver, please follow the steps below. Step 1. Select Realtek AL662 Audio Codec Driver from the list ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 79 Step 2. Click Next to continue. Step 3. Click Yes, I want to restart my computer now. Click Finish to complete the installation. ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 80: Chapter 5 Touch Screen Installation

    Chapter 5 Touch Screen Installation This chapter describes how to install drivers and other software that will allow your touch screen work with different operating systems. 5.1 Windows XP/2003/Vista/WIN7 Universal Driver Installation for PenMount 6000 Series Before installing the Windows XP/2003/Vista/WIN7 driver software, you must have the Windows XP/2003/Vista/WIN7 system installed and running on your computer.
  • Page 81 Step 2. Select Resistive Touch. Step 3. Click Next to continue. ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 82 Step 4. Read the license agreement. Click I Agree to agree the license agreement. Step 5. Choose the folder in which to install PenMount Windows Universal Driver. Click Install to start the installation. ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 83 Step 6. Wait for installation. Then click Next to continue. Step 7. Click Continue Anyway. ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 84: Installing Software (Projected Capacitive)

    Step 8. Click Finish to complete installation. 5.1.2 Installing Software (Projected Capacitive) Step 1. Insert the product CD, the screen below would appear. Click touch panel driver. ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 85 Step 2. Select Projected Capacitive. Step 3. Click Next to continue. ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 86 Step 4. Select I accept the terms of the license agreement. Click Next. Step 5. Click Install RS232 interface driver. ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 87 Step 6. Select None. Click Next. Step 7. Click OK. Step 8. Click Support Muti-Monitor System. Click Next. ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 88 Step 9. Go to C:\Program Files\eGalaxTouch. Click Next. Step 10. Click Next. ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 89 Step 11. Click Create a eGalaxTouch Utility shortcut on desktop. Click Next. Step 12. Wait for installation. ARCHMI-7XX (SBC-7106A) User Manual...

  • Page 90: Software Functions

    Step 13. Click Yes to do 4 point calibration. 5.2 Software Functions 5.2.1 Software Functions(Resistive Touch) Upon rebooting, the computer automatically finds the new 6000 controller board. The touch screen is connected but not calibrated. Follow the procedures below to carry out calibration. 1.
  • Page 91 Standard Calibration Click this button and arrows appear pointing to red squares. Use your finger or stylus to touch the red squares in sequence. After the fifth red point calibration is complete. To skip, press ‘ESC’. Advanced Calibration Advanced Calibration uses 4, 9, 16 or 25 points to effectively calibrate touch panel linearity of aged touch screens.
  • Page 92 Step 2.Click “Standard Calibration” to start calibration procedure NOTE: The older the touch screen, the more Advanced Mode calibration points you need for an accurate calibration. Use a stylus during Advanced Calibration for greater accuracy. Please follow the step as below: ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 93 Step 3.Come back to “PenMount Control Panel” and select Tools then click Advanced Calibration. Step 4. Select Device to calibrate, then you can start to do Advanced Calibration. NOTE: Recommend to use a stylus during Advanced Calibration for greater accuracy. ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 94 Plot Calibration Data Check this function and a touch panel linearity comparison graph appears when you have finished Advanced Calibration. The blue lines show linearity before calibration and black lines show linearity after calibration. Turn off EEPROM storage The function disable for calibration data to write in Controller.
  • Page 95 About This panel displays information about the PenMount controller and driver version. ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 96 Multiple Monitors Multiple Monitors support from two to six touch screen displays for one system. The PenMount drivers for Windows XP/2003/Vista/WIN7 support Multiple Monitors. This function supports from two to six touch screen displays for one system. Each monitor requires its own PenMount touch screen control board, either installed inside the display or in a central unit.
  • Page 97 2. When the mapping screen message appears, click OK. 3. Touch each screen as it displays “Please touch this monitor”. Following this sequence and touching each screen is called mapping the touch screens. Touching all screens completes the mapping and the desktop reappears on the monitors. Select a display and execute the “Calibration”...
  • Page 98 6. “Touch this screen to start its calibration” appears on one of the screens. Touch the screen. 7. “Touch the red square” messages appear. Touch the red squares in sequence. 8. Continue calibration for each monitor by clicking Standard Calibration and touching the red squares.
  • Page 99 Control Panel Open Control Panel Windows Beep Setting Beep function for each device Right Button When you select this function, a mouse icon appears in the right-bottom of the screen. Click this icon to switch between Right and Left Button functions.

  • Page 100: Software Functions(Projected Capacitive)

    5.2.2 Software Functions(Projected Capacitive) General In this window, you can see there is USB Controller. Click OK to continue. Monitor Mapping to adjust touch panel to search for device ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 101 Setting Beep Beep On Touch Beep On Release Beep From System Beep Beep From Sound Card Linearization Style 9 points 25 points Double Click Time Shorter Longer Double Click Area Smaller Bigger Normal mode Simulate the mouse mode ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 102 Option Function Enable Constant Touch Enable Auto Right Click Enable Touch Enable Cursor Stabilization Constant Touch Area Auto Right Click Time ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 103 Tools Click OK to continue the settings. 4 Points Calibration Do 4 points alignment to match display. Clear and Calibrate Clear linearization parameter and do 4 points alignment. Linearization Do 9 points linearization for better touchscreen linearity. Draw Test Do draw test to verify the touch accuracy. ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 104 Display In this window, it shows the mode of display. Enable Multiple Monitors. Map to main display if system has only one display monitor Full Screen Lower Screen Left Screen Upper Screen Right Screen ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 105 Other Other mode of display. Quarter1~4 and Customized area. Active Area Drag active area to enable Active Area Function. ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 106 Hardware Saturn Hardware Configuration ARCHMI-7XX (SBC-7106A) User Manual...
  • Page 107 About To display information about eGalaxTouch and its version. ARCHMI-7XX (SBC-7106A) User Manual...

This manual is also suitable for:

Archmi-718(p)Archmi-721(p)Archmi-717(p)Archmi-716Archmi-718Archmi-721 ... Show all

Table of Contents