Removing And Installing Components During Servicing; Notes On Installing And Removing Boards And Components - Fujitsu Siemens Computers LIFEBOOK P Series Easy Manual

Removing and installing components
during servicing
Only qualified technicians should repair your notebook. Unauthorised opening or incorrect
!
repair may greatly endanger the user (electric shock, fire risk) and will invalidate your
warranty.
You may remove and install the components described in this chapter yourself after consulting the
Hotline/Help Desk.
If you remove and install components without consulting the Hotline/Help Desk, then the
!
warranty of your notebook will be voided.
Notes on installing and removing boards and
components
Boards with electrostatic sensitive devices (ESD) are marked with the label shown.
When handling boards fitted with ESDs, you must always observe the following points:
● You must statically discharge yourself before working on the boards (e.g. by touching an
earthed object).
● The equipment and tools you use must be free of static charges.
● Pull out the power connector and remove the battery before you install or remove boards.
● Always hold boards with ESDs by their edges.
● Never touch pins or conductors on boards fitted with ESDs.
A26391-K223-Z121-1-7619, edition 1 61