Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Tvone 1T-DA-726 3G
Summary of Contents for Tvone 1T-DA-726 3G
- Page 1 Instruction Manual 1T-DA-726 3G/HD/SD-SDI Distribution Amplifier with Reclocking...
-
Page 3: Table Of Contents
Table of Contents Introduction Specifications Checking Package Contents Connecting the Hardware Operating The Unit Troubleshooting Limited Warranty Regulatory Compliance Contact Information... -
Page 4: Introduction
INTRODUCTION The 1T-DA-726 3G/HD/SD-SDI Distribution Amplifier, with reclocking, provides 6 outputs from a single SDI input for distribution to devices capable of receiving and/or displaying such signals. The 1T-DA-726 3G/HD/SD-SDI Distribution Amplifier provides third generation HD/SD signal distribution with triple-rate processing and six separately buffered and reclocked outputs. - Page 5 There are many factors affecting the quality of results when distributing SDI type signals. Some basic precautions will ensure the best possible performance from your new 1T-DA-726 3G/HD/SD-SDI Distribution Amplifier. • Output display device – The quality of the output signal will depend largely upon the type and quality of the SDI display device used.
-
Page 6: Specifications
SPECIFICATIONS Video Inputs 3G/HD/SD-SDI 1x via BNC Connector Video Output 3G/HD/SD-SDI 6x via BNC Connector SDI Transport SDI Standards 3G/HD/SD-SDI Data Rates 270 / 1483 / 1485 / 2970 Mbps Video Bandwidths [2.97Gpbs & 2.97/1.001Gbps] Supported Protocols DVB-ASI@270Mbps, SMPTE: 259M,292M,424M,425M Signal Reclocking Enabled, All Outputs Ancillary Data Pass-through Enabled, All Outputs... -
Page 7: Checking Package Contents
Always use a high quality cable, as short a length as possible, for best results. Connecting the Outputs to the Destination Devices Using a high quality SDI cable, connect each output of the 1T-DA-726 3G/HD/SD-SDI Distribution Amplifier to an SDI compliant device. Use the shortest cable run possible. -
Page 8: Operating The Unit
A Power LED on the unit will confirm power is present. A second LED will indicate that a valid SDI input signal is present and the 1T-DA-726 3G/HD/SD-SDI Distribution Amplifier has locked to the signal. Other than connecting cables and applying power, there are no operator interventions required. -
Page 9: 8.0 Regulatory Compliance
8.0 REGULATORY COMPLIANCE The 1T-DA-726 3G/HD/SD-SDI Distribution Amplifiers have been tested for compliance with appropriate FCC and CE rules and regulations. The Power Adaptor/Supplies have been tested for compliance with appropriate UL, CUL, CE, PSE, GS Rules, Regulations... -
Page 10: Contact Information
Erlanger, KY 41018 Westwood Industrial Estate Margate, Kent CT9 4JG, UK Tel 859-282-7303 Tel +44 (0)1843 873311 Fax 859-282-8225 Fax +44 (0)1843 873312 sales@tvone.com sales.europe@tvone.com www.tvone.com www.tvone.eu TV One Latin America TV One Mercosur 6991 NW 82 Avenue #8 Honduras 5849, 2...
Need help?
Do you have a question about the 1T-DA-726 3G and is the answer not in the manual?
Questions and answers