Samsung NV20 Service Manual page 49

www.electronicsmarket.com.au
F. Reset the camera.
G. Mark inspection for passing an adjustment.
H. After an adjustment, the camera checks the battery level. If the level is good, "OK" will be signaled and the
procedure continues. If the level is bad, "NG" will be signaled and the procedure stops.
- OK: AF lamp blinks once.
- NG: AF lamp blinks twice
I. After completing the procedure, data that were saved temporarily on the cache memory are moved to the
Flash ROM of the camera.
(To write the data, the procedure must be complete. Data saved on the Flash ROM are not affected by the
F/W update)
J. After completing the adjustment, a log file including adjustment data and results will be made on the
memory card.
- Log File Format: NV12XXX0.CSV
- All log files follow the format below. (Except the burning procedure result log file)
NV12XXX0.CSV
Index ItemA ItemB
1 ####
2 ####
* 3 ####
● Index: Times of Script Runs
● Result: Good / Bad Result
● File Writing Rule
- '*' represents the latest written line
- When a log file size exceeds the limit, a new log is created to record log information.
(e.g. NV12XXX1.CSV is created when the file size of NV12XXX0.CSV exceeds the limit.)
☞ Although each adjustment can be done separately, there may be adjustments that have to be done
before some of the others.
www.electronicsmarket.com.au
ItemC ItemO
#### #### ####
#### #### ####
#### #### ####
...
ItemN
...
####
...
####
...
####
55
Ⅲ. ADJUSTMENT
Result
OK
OK
OK