Hide thumbs Also See for NV24HD:

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Samsung NV24HD

  • Page 2: Table Of Contents

    4. Slide button ……………………………………………………………………………………… 56 5. OIS Upgrading …………………………………………………………………………………… 58 Ⅴ. ADJUSTMENT 1. Adjustment Precautions ………………………………………………………………………… 60 2. Adjustment Data Backup and Restoration for Main Board Replacement …………………… 64 - This Document can not be used without Samsung's authorization -...
  • Page 3 7) MAIN_EXP-I/F & HDMI 30P ……………………………………………………………………………… 97 8) MAIN_POWER IC …………………………………………………………………………… 98 9) MAIN_AM O-LED LCD …………………………………………………………… 99 10) MAIN_TOP/STROBO CONNECTOR ……………………………………………………………………… 100 11) MAIN_CARD B/D COM Ⅸ. SERVICE INFORMATION …………………………………………………………………………………………………101 - This Document can not be used without Samsung's authorization -...
  • Page 4: Ⅰ. Specification

    - Modes : RED EYE FIX, SLOW SYNC, FILL IN, RED EYE, AUTO, OFF - Range : Wide : 0.4m ~ 5.6m , Tele : 0.5m ~ 2.8m (ISO AUTO) - Recharging Time : Approx. 5 sec. - This Document can not be used without Samsung's authorization -...
  • Page 5 ·Frame rate : 60 FPS, 30 FPS, 15 FPS ·3.6X Optical Zoom and Mute in Zooming (Sound goes mute when operating the zoom function) ·Movie Editing (Embedded) : Pause during recording, Still Image Capture, Time Trimming - This Document can not be used without Samsung's authorization -...
  • Page 6 - Capacity (256MB MMC) SUPER FINE FINE NORMAL ※ These figures are measured under Samsung’ s standard conditions and may vary depending on shooting conditions and camera settings. Image Play - Type : Single image, Thumbnails, Slide show * SLIDE SHOW : with selected Effect & Music by folders...
  • Page 7 Weight - 145.5g (without batteries and card) Operating Temperature - 0 ~ 40° C Operating Humidity - 5 ~ 85% Software - Samsung Master, QuickTime Player 7.4, Adobe Reader - This Document can not be used without Samsung's authorization -...
  • Page 8: System Requirements

    Minimum 256MB RAM (256MB recommended) USB port USB port CD-ROM drive CD-ROM drive 1024x768 pixels, 16-bit color display compatible monitor (24-bit color display recommended), Microsoft DirectX 9.0 or later - This Document can not be used without Samsung's authorization -...
  • Page 9: Quicktime Player 7.4 : H.264(Mpeg4.Avc) Playback Requirements

    Macintosh Windows XP service pack2/Vista Minimum 512MB RAM (1GB recommended) Minimum 256MB RAM (1GB recommended) nVIDIA Geforce 7600GT or later / 64MB video card ATI X1600 series or later - This Document can not be used without Samsung's authorization -...
  • Page 10: The Capacities Of The Memory Card

    By sliding the switch to the top of the SD memory card, the data protection will be cancelled. ● Slide the switch to the top of the SD memory card before taking a picture. - This Document can not be used without Samsung's authorization -...
  • Page 11 About 20' 18" About 25' About 25' ● The zoom button doesn’ t function during the movie recording. ● The recording times can be changed by the zoom operation. - This Document can not be used without Samsung's authorization -...
  • Page 12: Lcd Monitor Indicator

    Ⅰ. SPECIFICATION 5. LCD monitor indicator ■ Recording mode [ Image & Full Status ] - This Document can not be used without Samsung's authorization -...
  • Page 13 Optical / Digital Zoom bar / Digital Zoom rate Number of available shots remaining Remaining time (Movie clip / Voice recording) Memory card icon / Internal memory icon Auto focus area - This Document can not be used without Samsung's authorization -...
  • Page 14 Ⅰ. SPECIFICATION ■ Play mode ISO : 160 AV : F2.8 TV : 1/40 FLASH : OFF 3648x2736 2008.01.01 [ Image & Full Status ] - This Document can not be used without Samsung's authorization -...
  • Page 15 Press the smart button Setup menu DPOF menu Delete menu Protect menu Slide show menu Playing Images Folder name and Stored image number 100-0001 Memory card icon / Internal memory icon - This Document can not be used without Samsung's authorization -...
  • Page 16: Connection Diagram

    Ⅰ. SPECIFICATION 6. CONNECTION DIAGRAM SD Card Card Reader TV Monitor IBM / MAC Lap top - This Document can not be used without Samsung's authorization -...
  • Page 17: Identification Of Features

    Photo style Zoom W button (Thumbnail)/ selector dial Zoom T button (Digital zoom) Microphone AMOLED monitor Eyelet for camera strap Smart buttons BACK button / OIS button Play mode button - This Document can not be used without Samsung's authorization -...
  • Page 18 Battery cover lever USB port/AV connection terminal ※ To open the battery chamber cover, slide it in the direction shown above. Battery chamber Battery holder Battery chamber cover Memory card slot - This Document can not be used without Samsung's authorization -...
  • Page 19 You can recharge your rechargeable battery, transfer a captured image to print, and download images with the cradle (optional). Camera connection terminal AV connection terminal DC connection terminal/ USB port HDMI connection terminal - This Document can not be used without Samsung's authorization -...
  • Page 20: Ⅱ. Installation

    Windows. A USB Driver for MAC is not included with the Application CD. You can use the camera with Mac OS 10.1~10.4. ■ Samsung Master : This is the all-in-one multi media software solution. You can download, view, edit and save your digital images and movie files with this software.
  • Page 21 Adobe Reader included in the Software CD-ROM. ● To install the Adobe Reader 6.0.1 correctly, Internet Explorer 5.01 or later had to be installed. Visit "www.microsoft.com" and upgrade the Internet Explorer. - This Document can not be used without Samsung's authorization -...
  • Page 22: Setting Up The Application Software

    2. Install the camera driver and DirectX by selecting a button shown on the monitor. If a latest version of DirectX was installed on your computer, DirectX may not be installed. - This Document can not be used without Samsung's authorization -...
  • Page 23 Ⅱ. INSTALLATION 3. Install the Samsung Master in the order shown. - This Document can not be used without Samsung's authorization -...
  • Page 24 Ⅱ. INSTALLATION 4. Install the QuickTime Player 7.4 in the order shown. ※ QuickTime Player 7.4 cannot be installed under Window 2000. - This Document can not be used without Samsung's authorization -...
  • Page 25 ※ If your OS is Windows XP / Vista, an image viewer program will open. If the download window of Samsung Master opens after starting Samsung Master, the camera driver was set up successfully. - This Document can not be used without Samsung's authorization -...
  • Page 26 Before opening the PDF files, you must install the Adobe Reader included in the Software CD-ROM. ● To install the Adobe Reader 6.0.1 correctly, Internet Explorer 5.01 or later has to be installed. Visit "www.microsoft.com" and upgrade the Internet Explorer. - This Document can not be used without Samsung's authorization -...
  • Page 27: Usb : Faq

    → When the camera is connected to the USB port located on the front of the computer, the computer may not recognise the camera. Connect the camera to the USB port located on the back of the computer. - This Document can not be used without Samsung's authorization -...
  • Page 28: Ⅲ. Exploded View And Part List

    Ⅲ. EXPLODED VIEW AND PART LIST 1. MAIN ASSEMBLY - This Document can not be used without Samsung's authorization -...
  • Page 29 PARTS LIST Fig.No Parts No. Parts Name Q’ty Available Parts Remarks AD97-15268A BATTERY_COVER_ASSY BLACK AD97-15782A BATTERY_COVER_ASSY SILVER 6003-001643 SCREW_1430_TAPTITE 6107-001485 BATTERY_COVER_SPRING AD61-03530A BATTERY HINGE 6003-001633 SCREW B AD63-02507A CARD_SHIELD_FOAM - This Document can not be used without Samsung's authorization -...
  • Page 30: Body Assembly-1

    Ⅲ. EXPLODED VIEW AND PART LIST 2. BODY ASSEMBLY-1 2-17 2-11 2-10 2-22 2-21 2-17 2-15 2-19 2-16 2-13 2-13 2-26 2-13 2-27 2-23 2-20 2-24 2-13 2-25 2-18 2-12 2-13 2-14 - This Document can not be used without Samsung's authorization -...
  • Page 31 2-20 3001-002319 SPEAKER 2-21 AD63-03115A SHEET-MAIN SHIELD 2-22 AD63-01994A SHIELD FOAM A 2-23 AD63-01246A IR CUT FILTER 2-24 AD73-00271A CCD_SEALING_RUBBER 2-25 6107-001483 CCD_ADJUST_SPRING 2-26 AD97-15201A CCD_PLATE_ASSY 2-27 6003-001643 SCREW - This Document can not be used without Samsung's authorization -...
  • Page 32: Body Assembly-2

    Ⅲ. EXPLODED VIEW AND PART LIST 3. BODY ASSEMBLY-2 3-10 3-15 3-13 3-10 3-16 3-12 3-11 3-14 3-10 - This Document can not be used without Samsung's authorization -...
  • Page 33 BATTERY LOCK LEVER SPRING AD61-03575A BATTEY_LOCK_LEVER_HINGE 3-10 6003-001633 SCREW B 3-11 AD63-03076A CUSHION-MOTOR 3-12 AD63-03003A CUSHION-BATTERY COVER 3-13 AD63-02839A TOUCH_BUTTON_TAPE 3-14 AD63-02351A TOP_SHIELD_FOAM 3-15 AD63-03028A SHEET-TOUCH BUTTON 3-16 AD63-02813A MAIN_FRAME_SHEET - This Document can not be used without Samsung's authorization -...
  • Page 34: Fornt Cover Assembly

    Ⅲ. EXPLODED VIEW AND PART LIST 4. FRONT COVER ASSEMBLY 4-10 4-11 4-12 - This Document can not be used without Samsung's authorization -...
  • Page 35 FRONT COVER ASSY_VLUU BLACK AD97-15266A FRONT COVER ASSY_SAMSUNG BLACK AD97-15661A FRONT COVER ASSY_藍調_NV106HD BLACK 4-12 AD97-15659A FRONT COVER ASSY_VLUU SILVER AD97-15660A FRONT COVER ASSY_SAMSUNG SILVER AD97-15662A FRONT COVER ASSY_藍調_NV106HD SILVER - This Document can not be used without Samsung's authorization -...
  • Page 36: Back Cover Assembly

    Ⅲ. EXPLODED VIEW AND PART LIST 5. BACK COVER ASSEMBLY - This Document can not be used without Samsung's authorization -...
  • Page 37 Remarks AD63-01500A BACK_COVER AD63-02503A LCD_WINDOW_TAPE AD61-03526A STRAP_HOLDER BLACK AD61-03660A STRAP_HOLDER SILVER AD61-03226A STRAP_HOLDER_PLATE 6003-001674 SCREW-H1 AD64-02087A REAR_ACCESS_WINDOW AD64-02139A LCD_WINDOW AD97-15267A BACK COVER ASSY BLACK AD97-15784A BACK COVER ASSY SILVER - This Document can not be used without Samsung's authorization -...
  • Page 38: Top Cover Assembly

    Ⅲ. EXPLODED VIEW AND PART LIST 6. TOP COVER ASSEMBLY 6-20 6-18 6-19 6-11 6-10 6-12 6-15 6-12 6-13 6-14 6-16 6-17 - This Document can not be used without Samsung's authorization -...
  • Page 39 POWER_BUTTON SILVER 6-16 AD97-15185A TOP_KEY_PLATE_ASSY 6-17 6003-001630 SCREW-TAPTITE 6-18 AD63-02500A AF_LED_WINDOW_TAPE AD63-02528A MODE_DIAL_CAP BLACK 6-19 AD63-02778A MODE_DIAL_CAP SILVER AD97-15270A TOP COVER ASSY BLACK 6-20 AD97-15785A TOP COVER ASSY SILVER - This Document can not be used without Samsung's authorization -...
  • Page 40: Barrel Assembly

    7-47 7-17 7-15 7-12 7-14 7-54 7-47 7-13 7-10 7-11 7-31 7-30 7-28 7-24 7-26 7-21 7-23 7-29 7-32 7-27 7-25 7-56 7-49 7-22 7-20 7-57 7-18 7-19 7-55 - This Document can not be used without Samsung's authorization -...
  • Page 41 SILVER 7-15 AD67-00732A GUIDE_BARREL-UW4 7-16 AD67-00734A OUTER_BARREL-UW4 7-17 AD61-03264A SHUTTER_FPCB_GUIDE-UW4 7-18 AD63-01924A 1ST_BARREL_SHIELD_A-UW4 AD67-00735A ZOOM_RING BLACK 7-19 AD67-00747A ZOOM_RING SILVER 7-20 AD67-00604A G1_LENS-NV2_104W 7-21 AD67-00610A G2_LENS-NV2_104W 7-22 AD63-01929A 1ST_BARREL_SHIELD_B-UW4 - This Document can not be used without Samsung's authorization -...
  • Page 42 AD63-01525A BARREL-3RD-UW4 7-35 AD97-15167A MAINFPCB_SMD_ASSY-UW4 7-36 AD66-00567A AF_GUIDE_SHAFT 7-37 AD61-03265A AF_HOLDER-UW4 7-38 AD61-03446A LENS_BASE-UW4 7-39 6107-001471 AF_SPRING-UW4 7-40 3101-001450 AF_MOTOR_NV2_104W 7-41 6003-001681 AF_LEAD_SCREW-UW4 7-42 AD66-00514A AF_GEAR_B-UW4 7-43 AD66-00519A AF_GEAR_C-UW4 - This Document can not be used without Samsung's authorization -...
  • Page 43 AD97-15135A CAM_BARREL_ASSY SILVER AD97-13712A ZOOM_RING_ASSY BLACK 7-55 AD97-15136A ZOOM_RING_ASSY 7-56 AD97-13711A 2ND_BARREL_ASSY-UW4 AD97-15134A SUB_BARREL_ASSY-UW4 BLACK 7-57 AD97-15137A SUB_BARREL_ASSY SILVER 7-58 AD97-13716A LENS_BASE_ASSY-UW4 AD97-13717A BARREL_ASSY BLACK 7-59 AD97-15138A BARREL_ASSY SILVER - This Document can not be used without Samsung's authorization -...
  • Page 44: Packing Item

    Ⅲ. EXPLODED VIEW AND PART LIST 8. PACKING ITEM 8-12 8-13 8-10 8-11 8-15 8-16 8-17 8-14 - This Document can not be used without Samsung's authorization -...
  • Page 45 AD81-01565A GT_COLOR_STICKER_Sliver AD81-01535A COLOR STICKER_BLACK AD81-01572A COLOR STICKER_PINK AD44-00129A AC_ADAPTOR_4.2V (SAC-47)_KOR AD44-00133A AC_ADAPTOR_4.2V (SAC-47)_EXP AD44-00131A AC_ADAPTOR_4.2V (SAC-47)_USA AD44-00130A AC_ADAPTOR_4.2V (SAC-47)_UK AD44-00135A AC_ADAPTOR_4.2V (SAC-47)_AUS AD44-00134A AC_ADAPTOR_4.2V (SAC-47)_CHI_TSOE AD44-00132A AC_ADAPTOR_4.2V (SAC-47)_ARG - This Document can not be used without Samsung's authorization -...
  • Page 46 CRADLE_SCC-NV4HD 8-14 6902-000921 PE BAG (FOR ACCESSORY) AD68-02716A U_M_VLUU_NV24 HD AD68-02717A U_M_NV24 HD_CHI_S AD68-02718A U_M_NV24 HD_E_G_F_SP_I_DU_P 8-15 AD68-02719A U_M_NV24 HD_E_G_FI_SW_DA_RU AD68-02720A U_M_NV24 HD_EN_TU_CH_IN_AR_TH AD68-02721A U_M_NV24 HD_ENG_SPA_FRA_3 AD68-02722A U_M_NV24 HD_E_F_I_G_P_CZ_S_H_R_B - This Document can not be used without Samsung's authorization -...
  • Page 47 WARRANTY CARD_2 YEARS 6801-001650 WARRANTY CARD_RUS(3 YEARS) 6801-001647 CARD_PRODUCT(Mexico) 6801-001656 WARRANTY CARD_IRAN 8-17 6801-001659 WARRANTY CARD_TURKEY 6801-001660 SERVICE_CENTER_TURKEY 6801-001662 WARRANTY_CARD_Argentina 6801-001664 LOCAL_WARRANTY_CARD_INDIA 6801-001665 LOCAL_WARRANTY CARD_ITALIA AD68-02558A PRC_CARD_RUSSIA 6801-001663 AS_CENTER_MANUAL_TSEO_S - This Document can not be used without Samsung's authorization -...
  • Page 48: Ⅳ. Firmware

    2. Press the Shutter button (S2) while holding down the W (Wide) and the Back buttons. 3. Turn on the camera and check whether the camera is reset or not. - This Document can not be used without Samsung's authorization -...
  • Page 49 Therefore, this function deletes all the data saved in the internal memory. In principle, you have to run “Factory Reset All” after firmware upgrade. (When the camera restarts after firmware upgrade, it automatically enters the Factory Reset All mode.) - This Document can not be used without Samsung's authorization -...
  • Page 50: Checking The Version

    Ⅳ. FIRMWARE 2. Checking the Version 1. Remove the memory card from the camera. 2. Turn on the camera and select SCENE, using the Mode Dial. - This Document can not be used without Samsung's authorization -...
  • Page 51 W (Wide) and the Back buttons. 4. The Developer mode menu will appear on the LCD monitor. Select 1. Confirm version. 5. The current version of the firmware will appear on the LCD. - This Document can not be used without Samsung's authorization -...
  • Page 52 TOUCH PAD VER This is the firmware version of the Micom that drives the touchpad. OIS VER This is the firmware version of the Micom that drives the OIS. - This Document can not be used without Samsung's authorization -...
  • Page 53: Upgrading The Firmware

    * To upgrade the firmware, the battery level indicator on the LCD monitor must be full (level three). 3. Turn on the camera and select SCENE, using the Mode Dial. - This Document can not be used without Samsung's authorization -...
  • Page 54 5. The Developer mode menu will appear on the LCD. Select 3. Upgrade Firmware. 6. The upgrade will start, displaying the progress message on the LCD as shown below. - This Document can not be used without Samsung's authorization -...
  • Page 55 Ⅳ. FIRMWARE 7. After completing the upgrade, the camera is turned off automatically. 8. Turn on the camera again and select Reset in the SETUP menu. - This Document can not be used without Samsung's authorization -...
  • Page 56: Slide Button

    * To upgrade the firmware, the battery level indicator on the LCD monitor must be full (level three). 3. Turn on the camera and select SCENE, using the Mode Dial. - This Document can not be used without Samsung's authorization -...
  • Page 57 LCD. Select 4. Upgrade Slide Button. 6. The upgrade will start, displaying the progress message on the LCD as shown below. After completing the upgrade, the camera is turned off automatically. - This Document can not be used without Samsung's authorization -...
  • Page 58: Ois Upgrading

    * To upgrade the firmware, the battery level indicator on the LCD monitor must be full (level three). 3. Turn on the camera and select SCENE, using the Mode Dial. - This Document can not be used without Samsung's authorization -...
  • Page 59 LCD as shown below. After completing the upgrade, the camera is turned off automatically. * After completing the OIS firmware, conduct the OIS Centering adjustment. - This Document can not be used without Samsung's authorization -...
  • Page 60: Ⅴ. Adjustment

    This document however deals with examples of the individual processes. B. The adjustment of the NV24HD is done automatically after inserting an SD card that includes specific script files, and turning on the camera. The required files are NV2_104.txt and adjust_t C.
  • Page 61 E. Press the Power button to turn the camera on. Adjustment will start automatically. Figure 3. Set the camera according to the adjustment environment and then turn it on. - This Document can not be used without Samsung's authorization -...
  • Page 62 - When a log file size exceeds the limit, a new log is created to record log information. (e.g. 104XXXX.CSV is created when the file size of 104XXXX.CSV exceeds the limit.) - This Document can not be used without Samsung's authorization -...
  • Page 63 • 「PUNT Adjustment」 must precede 「Taking Resolution Chart」 . • Most of the adjustments that may cause serious problems are listed in the integrated adjustment. Therefore, if you follow the sequence, there should be no problems. - This Document can not be used without Samsung's authorization -...
  • Page 64: Adjustment Data Backup And Restoration For Main Board Replacement

    Since the firmware that is released when an important part such as the lens or CCD is changed may have a default setting that differs from the previous version, use the firmware that was released in the year when the part was manufactured. - This Document can not be used without Samsung's authorization -...
  • Page 65: Ois Centering Adj

    3. The adjustment is conducted automatically. The OIS module moves up, down, left and right two to three times. 4. When the adjustment is complete, the camera will automatically be turned off. - This Document can not be used without Samsung's authorization -...
  • Page 66: Battery Level Test

    1. Copy the NV2_104.txt and adjust_t files onto the root directory of the SD card and install the card into the camera. 2. Turn on the camera and the Adjustment mode will be selected automatically. - This Document can not be used without Samsung's authorization -...
  • Page 67 ● The input_average is the mean value of the values entered 10 times. ● Result : Good / Bad Result ● File Writing Rule - '*' represents the latest written line - This Document can not be used without Samsung's authorization -...
  • Page 68: Ccd Gain Adjustment

    1. Copy the NV2_104.txt and adjust_t files onto the root directory of the SD card and install the card into the camera. 2. Place the camera onto the light source. - This Document can not be used without Samsung's authorization -...
  • Page 69 ● The CCD gain is the result of the use of the Tungsten source of light. ● The daylight value is the result of the CCD gain written in the FLASHROM in the camera. ● Result : Good / Bad Result - This Document can not be used without Samsung's authorization -...
  • Page 70: Shutter Close Adjustment

    1. Copy the NV2_104.txt and adjust_t files onto the root directory of the SD card and install the card into the camera. 2. Place the camera onto the light source. - This Document can not be used without Samsung's authorization -...
  • Page 71 Open the log file with Notepad and determine whether it is Good or Bad. Index IRIS Type SS_Ref CAPtemp_Eva_C SS_Delay_Time Result SS_Delay1 ... SS_Delay30 Small 8120 8140 -2816 -1583 Small 8192 8232 -2766 -1583 - This Document can not be used without Samsung's authorization -...
  • Page 72: Lens Shading Adjustment

    1. Copy the NV2_104.txt and adjust_t files onto the root directory of the SD card and install the card into the camera. 2. Place the camera onto the light source. - This Document can not be used without Samsung's authorization -...
  • Page 73 Open the log file with Notepad and determine whether it is Good or Bad. Index Type ULGain URGain ULGain URGain Avg Type ULGain URGain ULGain URGain Result Before After Before After Before After Before After - This Document can not be used without Samsung's authorization -...
  • Page 74: Flash Gno. Adjustment

    1. Copy the NV2_104.txt and adjust_t files onto the root directory of the SD card and install the card into the camera. 2. Set the camera up in a darkroom. - This Document can not be used without Samsung's authorization -...
  • Page 75 After completing the adjustment, an adjustment result log file should have been created in the SD memory card. Open the log file with Notepad and determine whether it is Good or Bad. - This Document can not be used without Samsung's authorization -...
  • Page 76: Awb Strobo Adjustment

    1. Copy the NV2_104.txt and adjust_t files onto the root directory of the SD card and install the card into the camera. 2. Set the camera up in a darkroom. - This Document can not be used without Samsung's authorization -...
  • Page 77 After completing the adjustment, an adjustment result log file should have been created in the SD memory card. Open the log file with Notepad and determine whether it is Good or Bad. - This Document can not be used without Samsung's authorization -...
  • Page 78: Punt Adjustment

    1. Copy the a NV2_104.txt and adjust_t files onto the root directory of the SD card and install the card into the camera. 2. Set the camera according to the conditions of the specified adjustments. - This Document can not be used without Samsung's authorization -...
  • Page 79 After completing the adjustment, an adjustment result log file should have been created in the SD memory card. Open the log file with Notepad and determine whether it is Good or Bad. - This Document can not be used without Samsung's authorization -...
  • Page 80: Burning Test

    ⑤ However, this test can only be restarted once. D. Procedures 1. Copy the NV2_104.txt and adjust_t files onto the root directory of the SD card and install the card into the camera. - This Document can not be used without Samsung's authorization -...
  • Page 81 Ⅴ. ADJUSTMENT 2. Turn on the camera and the Adjustment mode will be selected automatically. 3. Reset the camera. 4. Start the Burning Test. - This Document can not be used without Samsung's authorization -...
  • Page 82: Ccd Defect Pixel Test

    1. Copy the NV2_104.txt and adjust_t files onto the root directory of the SD card and install the card into the camera. 2. Turn on the camera and the Adjustment mode will be selected automatically. - This Document can not be used without Samsung's authorization -...
  • Page 83 After completing the adjustment, an adjustment result log file should have been created in the SD memory card. Open the log file with Notepad and determine whether it is Good or Bad. Index Type Total Field 1 Field 2 Field 3 Result WHITE - This Document can not be used without Samsung's authorization -...
  • Page 84: Ccd Black Level(Ob) Adjustment

    After completing the adjustment, an adjustment result log file should have been created in the SD memory card. Open the log file with Notepad and determine whether it is Good or Bad. - This Document can not be used without Samsung's authorization -...
  • Page 85: Slide Button Adjustment

    1. Copy the NV2_104.txtt and adjust_t files onto the root directory of the SD card and install the card into the camera. 2. Turn on the camera and the Adjustment mode will be selected automatically. - This Document can not be used without Samsung's authorization -...
  • Page 86 After completing the adjustment, an adjustment result log file should have been created in the SD memory card. Open the log file with Notepad and determine whether it is Good or Bad. - This Document can not be used without Samsung's authorization -...
  • Page 87: Ⅵ. Block Diagram

    Ⅵ. BLOCK DIAGRAM - This Document can not be used without Samsung's authorization -...
  • Page 88: Ⅶ. Pattern Diagram

    Ⅶ. PATTERN DIAGRAM 1. PARTS ARRANGEMENT FOR EACH PCB ASS’Y 1) MAIN_TOP - This Document can not be used without Samsung's authorization -...
  • Page 89: Main_Bottom

    Ⅶ. PATTERN DIAGRAM 2) MAIN_BOTTOM - This Document can not be used without Samsung's authorization -...
  • Page 90: Ⅷ. Circuit Diagram

    Ⅷ. CIRCUIT DIAGRAM 1) MAIN_SUB CONNECTOR - This Document can not be used without Samsung's authorization -...
  • Page 91: Main_Pre_Layout

    Ⅷ. CIRCUIT DIAGRAM 2) MAIN_PRE_LAYOUT - This Document can not be used without Samsung's authorization -...
  • Page 92: Main_Afe Block

    Ⅷ. CIRCUIT DIAGRAM 3) MAIN_AFE BLOCK - This Document can not be used without Samsung's authorization -...
  • Page 93: Main_Memory

    Ⅷ. CIRCUIT DIAGRAM 4) MAIN_MEMORY - This Document can not be used without Samsung's authorization -...
  • Page 94: Main_Micom

    Ⅷ. CIRCUIT DIAGRAM 5) MAIN_MICOM - This Document can not be used without Samsung's authorization -...
  • Page 95: Main_Motor

    Ⅷ. CIRCUIT DIAGRAM 6) MAIN_MOTOR - This Document can not be used without Samsung's authorization -...
  • Page 96: Main_Exp-I/F & Hdmi 30P

    Ⅷ. CIRCUIT DIAGRAM 7) MAIN_EXP-I/F & HDMI 30P - This Document can not be used without Samsung's authorization -...
  • Page 97: Main_Power Ic

    Ⅷ. CIRCUIT DIAGRAM 8) MAIN_POWER IC - This Document can not be used without Samsung's authorization -...
  • Page 98: Main_Am O-Led Lcd

    Ⅷ. CIRCUIT DIAGRAM 9) MAIN_AM O-LED LCD - This Document can not be used without Samsung's authorization -...
  • Page 99: Main_Top/Strobo Connector

    Ⅷ. CIRCUIT DIAGRAM 10) MAIN_TOP/STROBO CONNECTOR - This Document can not be used without Samsung's authorization -...
  • Page 100: Main_Card B/D Com

    Ⅷ. CIRCUIT DIAGRAM 11) MAIN_CARD B/D COM - This Document can not be used without Samsung's authorization -...
  • Page 101: Ⅸ. Service Information

    Wearing the band which cuts off the electric current and do the reparing PCB type Where the blocking static electricity mat is on by preventing the defect of parts. Be careful of defect and change by pincette. CONTACT type - This Document can not be used without Samsung's authorization -...
  • Page 102 Ⅸ. SERVICE INFORMATION 2. Disassembling the Camera 1. Remove the 4 screws. 2. Remove the 4 screws. 3. Remove the 3 screws. - This Document can not be used without Samsung's authorization -...
  • Page 103 Ⅸ. SERVICE INFORMATION 4. Separate the Back Cover. 5. Separate the Front Cover. - This Document can not be used without Samsung's authorization -...
  • Page 104 Discharge to the main condenser as shown by the figure below. 6. Remove the PCB(①) from the connector, remove the soldering(②) on the Flash PCB and unscrew the screw (③). - This Document can not be used without Samsung's authorization -...
  • Page 105 Ⅸ. SERVICE INFORMATION 7. Be careful of the section that locks the top cover assy in place, as shown in the figure. 8. Separate the Top Cover Assy. - This Document can not be used without Samsung's authorization -...
  • Page 106 Ⅸ. SERVICE INFORMATION 9. Disconnect the five connectors. 10. Remove the 3 screws. - This Document can not be used without Samsung's authorization -...
  • Page 107 Ⅸ. SERVICE INFORMATION 11. Separate the Main PCB Assy. 12. Be careful of the connector connected to the main PCB assy (during assembly and disassembly). - This Document can not be used without Samsung's authorization -...
  • Page 108 Ⅸ. SERVICE INFORMATION 13. Remove the 3 screws. 14. Separate the SD CARD PCB Assy. 15. Remove the screw. - This Document can not be used without Samsung's authorization -...
  • Page 109 Ⅸ. SERVICE INFORMATION 16. Separate the FLASH PCB Assy. 17. Remove the 3 screws. - This Document can not be used without Samsung's authorization -...
  • Page 110 Ⅸ. SERVICE INFORMATION 18. Separate the BARREL Assy. 19. Remove the sticker from the figure. - This Document can not be used without Samsung's authorization -...
  • Page 111 Ⅸ. SERVICE INFORMATION 20. Remove the sticker from the figure. 21. Separate the PCB from the Connector. - This Document can not be used without Samsung's authorization -...
  • Page 112 Ⅸ. SERVICE INFORMATION 22. Separate the Slide Button PCB. 23. Remove the screw. - This Document can not be used without Samsung's authorization -...
  • Page 113 Ⅸ. SERVICE INFORMATION 24. Separate the Zoom Button. 25. Remove the screw. - This Document can not be used without Samsung's authorization -...
  • Page 114 Ⅸ. SERVICE INFORMATION 26. Separate the Button PCB Assy. 27. Separate the LCD PCB Assy. - This Document can not be used without Samsung's authorization -...
  • Page 115 1. Remove the 3 screws. 2. Separate the CCD PCB Assy. 3. Make sure not to lose the three screws for the CCD PCB assy, as shown in the figure. - This Document can not be used without Samsung's authorization -...
  • Page 116 Ⅸ. SERVICE INFORMATION 4. Separate the Shutter PCB Connector. 5. Remove the screw from the zoom gearbox. 6. Remove the screw on the back of the zoom gearbox. - This Document can not be used without Samsung's authorization -...
  • Page 117 8. Remove the 3 screws. 9. Don't disassemble the zoom position sensor section yet. Caution Be careful of damage to the internal lock, the double sided tape for the PCB and the PCB. - This Document can not be used without Samsung's authorization -...
  • Page 118 Be careful of damage to the double sided tape for the PCB and the PCB. 11. Remove the lens base assy completely. 12. Remove the screw from the Shutter PCB. - This Document can not be used without Samsung's authorization -...
  • Page 119 14. Separate the Outer Guide Barrel with reference to the part circled in blue as shown below. 15. Separate the Outer Guide Barrel with reference to the part circled in blue as shown below. - This Document can not be used without Samsung's authorization -...
  • Page 120 Ⅸ. SERVICE INFORMATION 16. Separate the Outer Guide Barrel. 17. Separate the shutter assy as shown in the figure. 18. Separate the Shutter Assy. - This Document can not be used without Samsung's authorization -...
  • Page 121 Ⅸ. SERVICE INFORMATION Refrain from disassembling the shutter assy in the state below (replace assy). Reference The OIS module is applied to the shutter assy (do not disassemble). - This Document can not be used without Samsung's authorization -...
  • Page 122 20. Separate the Lens Cap Assy. 21. Separate the Inner Cam Guide with reference to the part circled in blue as shown below. - This Document can not be used without Samsung's authorization -...
  • Page 123 22. Separate the Inner Cam Guide. Reference •Reference for installation Assemble the shutter assy with the lens cap lever as a point of reference, as shown in the figure. - This Document can not be used without Samsung's authorization -...
  • Page 124 Ⅸ. SERVICE INFORMATION If point “A” is positioned correctly, the two valleys (“B”) in the inner cam guide will be shown. - This Document can not be used without Samsung's authorization -...
  • Page 125 (see the position of the lens cap lever). Put the shutter assy into the right valley of the inner cam as shown in the figure. - This Document can not be used without Samsung's authorization -...

Table of Contents