SIMULATION MODE
This select whether simulation mode is or is not shown.
60
80
11.6
17.6
V
CHANGE OF SCREEN MODE
You can change the display (landscape, portrait, landscape reverse and portrait
reverse) according to the status of installing the unit.
Portrait
Portrait Reverse
Landscape Reverse
SYSTEM RESET
When you want to return to factory setting, execute system reset.
Switch the power off by pressing OFF key. Then turn the power on again.
1
[6. OTHERS]
SIMULATION]is selected on MENU 2.
60
2
OFF : Simulation mode is canceled.
ON
80
1
[6. OTHERS]
DISPLAY]is selected on MENU 2.
Landscape
2
Select LANDSCAPE, P REV, L REV or PORTRAIT.
1
[6. OTHERS]
SYSTEM RESET]is selected on MENU 2.
2
Press
3
SYSTEM RESET ON BY [A]
CANCEL BY [CLR]
[6.SYSTEM MENU]
: Simulation mode is shown.
In case of simulation mode, DEMO is
shown on the lower right of screen.
[6.SYSTEM MENU]
[6.SYSTEM MENU]
key (AUTO key).
key: Returns to factory setting.
key: It is canceled and returns to System
Reset mode.
43
[1.
[2.
[3.