CORRECTION: KEEL OFFSET
It enables to set the draft value of boat when you want to indicate the depth from
sea surface. You can set draft value at 0.1m step from range of 0~+2.0m.
CORRECTION: WATER TEMPERATURE CORRECTION
You can correct the water temperature at 0.1 step from range of –3.0 ~ +3.0
after connecting optional water temperature sensor. Please set the corrected value
so that water temperature digit shown on the bottom of screen is equal to real
temperature.
CORRECTION: VOLTAGE CORRECTION
You can correct the voltage at 0.1 V step from range of –2.0V~+2.0V.
Please set the corrected value so that battery voltage digit shown on the bottom of
screen is equal to real battery voltage.
1
[6. OTHERS]
OFFSET] is selected on MENU 2.
2
Change the draft value by RIGHT/LEFT
key.
1
[6. OTHERS] [2.ADJUST] [2. TEMP ADJ] is
selected on MENU 2.
2
Change the corrected value by RIGHT/LEFT
key.
1
[6. OTHERS] [2.ADJUST] [3. VOLT ADJ] is
selected on MENU 2.
2
Change the corrected value by RIGHT/LEFT
key.
37
[2.ADJUST]
[1. KEEL