Site Survey; Figure 4-9: Site Survey; Figure 4-11: Psk Needed For Connection - Linksys WUSB54GS EU User Manual

2.4ghz 802.11g wireless-g usb network adapter with speedbooster
Hide thumbs Also See for WUSB54GS EU:
Table of Contents

Advertisement

Available languages

Available languages

Wireless-G USB Network Adapter with SpeedBooster

Site Survey

The Site Survey screen displays a list of available networks in the table on the left. The table shows each
network's SSID, Channel, and the quality of the wireless signal the Adapter is receiving. You may click SSID, CH
(Channel), or Signal, to sort by that field.
SSID - The SSID or unique name of the wireless network is displayed here.
CH - This is the channel that the network uses.
Signal - This is the percentage of signal strength, from 0 to 100%.
Site Information

Figure 4-9: Site Survey

For each network selected, the following settings are listed:
SSID - This the SSID or unique name of the wireless network.
Wireless Mode - This is the mode of the wireless network currently in use.
Channel - This is the channel to which the wireless network devices are set.
Security - The status of the wireless security feature is displayed here.
MAC Address- The MAC address of the wireless network's access point is displayed here.
Refresh - Click the Refresh button to perform a new search for wireless devices.
Figure 4-10: WEP Key Needed for Connection
Connect - To connect to one of the networks on the list, select the wireless network, and click the Connect
button. If the network has encryption enabled, a screen appear requiring security information.
If the network has the wireless security WEP encryption enabled, then you will see the WEP Key Needed for
Connection screen. Select the appropriate level of WEP encryption, 64-bit or 128-bit Then enter the network's
Passphrase or WEP Key. To connect to the network, click Connect. To cancel the connection, click Cancel.
If the network has PSK wireless security enabled, then you will see the PSK Needed for Connection screen. Select
the appropriate encryption type, TKIP or AES. Enter the network's Passphrase or pre-shared key in the
Passphrase field. To connect to the network, click Connect. To cancel the connection, click Cancel.

Figure 4-11: PSK Needed for Connection

Chapter 4: Using the Wireless Network Monitor
25
Site Survey

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wusb54gs laWusb54gs uk

Table of Contents