Wireless-G USB Network Adapter with SpeedBooster
Valid hexadecimal characters are "0" to "9" and "A" to "F".
Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.
PSK Needed for Connection
Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down
menu.
Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field.
The longer and more complex your Passphrase is, the more secure your network will be.
Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.
2. After the Adapter has been configured for the network, the Congratulations screen will appear. Click Connect
to Network to connect to your network.
To check the link information, search for available wireless networks, or make additional configuration
changes, refer to Chapter 4: Using the Wireless Network Monitor.
Chapter 3: Setting up and Connecting the USB Network Adapter
Setting Up the Adapter
Congratulations! Setup is complete.
Figure 3-13: PSK Needed for Connection
Figure 3-14: The Congratulations screen
12