Table of Contents
Advertisement
Around the steering wheel 2
07 Power switch
Operation range of the key
•
To start the Plug-In Hybrid Electric Vehicle system, engage
the parking brake, depress the brake pedal, and then press
the power switch. The READY indicator on the instrument
cluster should stop blinking and stay constantly illuminated,
indicating that the startup has been completed.
•
To stop the Plug-In Hybrid Electric Vehicle system, stop the
vehicle, press the electrical parking switch, set the selector
position to
and then press the power switch.
•
If the Plug-In Hybrid Electric Vehicle system needs to be
stopped immediately in an emergency while driving, press
and hold the power switch for more than 3 seconds or press
it at least three times in quick succession. (This should not be
carried out except in an emergency.)
Using the keyless operation key,
you can start or stop the Plug-In
Hybrid Electric Vehicle system or
switch between the power
modes if the key is located
within its operation range
shown on the left.
•
To switch between the power modes (OFF/ACC/ON), press
the power switch without depressing the brake pedal. The
selected power mode can be identified by the colour of the
indicator lamp on the switch. The indicator lamp on the
switch is not illuminated while the Plug-In Hybrid Electric
Vehicle system is off.
•
If you cannot start the Plug-In Hybrid Electric Vehicle system
or switch between the power modes, the keyless operation
key may be in a place where the signal is poor or the key's
battery may have run out.
OFF : Lamp extinguished
ACC: Lamp illuminated in orange
ON : Lamp illuminated in blue
13
Hide quick links:
Advertisement
Table of Contents
