Driving - Mitsubishi Outlander Plug-in hybrid Quick Manual

Driving

Operating the selector lever
To start the vehicle, follow the steps below.
Step 1 Ensure that the
You cannot shift into
selector to those positions while the
extinguished or blinking. The selected position display
will not change to
Step 2 Depress the brake pedal completely.
Step 3 Move the selector lever to
Step 4 Ensure that the selected position display shows
Important points!
To enter the READY mode, press the power switch while
holding down the brake pedal.
To put the power switch to OFF, press the switch once when
the indicator lamp is blue (ON) or twice when the lamp is
orange (ACC) while the brake pedal is released.
indicator is illuminated.
or even if you move the
indicator is
or , either.
or .
R
Reverse
or .
Use position when powerful braking is needed such
as when driving down a steep hill.
Position is only selectable from position
Power switch
N Neutral
D
Drive
B
Regenerative brake
.
Warning!
While driving, do not put any
object near the selector lever,
which may be accidentally
pushed against the selector,
which may then move into .
9