Default Setting; Off - Samsung SRN-472S User Manual

DEFAULT SETTING

To reset the system, move to "System Management > Settings > Load Factory Default" and press the
<Initialization> button.
This returns the factory default settings.
`
M
When you initialize the system without changing the <Authority Setting>, you must enter the ID and password to log into the
system after it reboots. The ID and password are "admin" and "4321", respectively.
Please change the password after you log in.
`
The initial administrator ID is "admin" and the password should be set when logging in for the first time.
`
Please change your password every three months to safely protect personal information and to prevent the damage of the information theft.
Please, take note that it's a user's responsibility for the security and any other problems caused by mismanaging a password.
Category
Date/Time/Language
System
System Management
Storage Device
Device
Remote Device
Details
Date/Time/Language
Admin
User
Permission Setup
System Information
Camera Channel Setup
HDD Alarm
Remote Control
ID
Monitor Monitor
Date
Time
Time Zone
Time Sync.
DST
Language
ID
Restricted Access
Restriction on Network Access
Auto Log out
Manual Input of ID
Device Name
Video
Audio
Camera Name
Check Alarm Output Port
Duration
Replace Alarm Output Port
Duration
Event Display
Display
Multi CH SEQ Time
Video Output
Display Position Setup
Factory Default
YYYY-MM-DD
24 hours
GMT

OFF

OFF
English
admin
Backup/Record/Record
Stop/Search/PTZ/Remote
Alarm Out/Shutdown
None
3 Min
OFF
NVR
ON
OFF
CAM 01 ~ CAM 04
BEEP
Continuous
BEEP
Continuous
ON
00
OFF
All
5 sec
VGA(1280x1024)
30
English _135