Gs-Sl Series And Gs-Wt Series Sdk And App Introduction; Generalscan Input Installation And Usage - Generalscan GS-M100BT Quick Start Manual

GS-SL Series and GS-WT Series SDK and App Introduction

You should install driver in Android system before use GS-SL series and GS-WT series
barcode device.
Note: Only Android 4.0 or above system support this device.
You have two way to install the driver, one is Generalscan Input IME. Another is GS-
SDK development kit .You can embedded SDK into your application to scan barcode
directly.

Generalscan Input Installation and Usage

Please download the Generalscan Input APK and help document from the following
address:
http://www.generalscan.com/pdf/Generalscan-Input.apk
http://www.generalscan.com/pdf/GS-BlueInput-UserManual.pdf
This input IME APK compatiable with Generalscan bluetooth barcode scanner.When
you use for GS-SL series and GS-WT1000 series product,you don't need any setting for
it .
After you install Generalscan-Input.apk into Android smartphone,Please check
Generalscan input and set Generalscan Input as default input method.
When GS-SL and GS-WT power on normally,Android smartphone will detect the
USB accessory device,at the same time ,the smartphone battery inidcator will turn into
charging mode. The blue LED will turn on .The status bar in Android smartphone will
display as"Connected as a media device"and"Connected to a USB accessory"
eneralscan SDK Installation and Usage
G
When you use GS-SDK devlopment kit to use GS-SL，GS-WT series product ,you
don't need install Generalscan Input. Please download the GS-SDK developemtn kit
from the following address:
http://www.generalscan.com/pdf/FinalSDK-Public.zip
Unzip FinalSDK-Public.zip file, you will find the following folder and file：
GeneralscanUSBBroadcast.apk
usb-service-server This directory is source code for USB Accessory Broadcast server
App.You can modify this source code yourself and start service and run it in background
.Don't kill this service or end task by task manager.
GeneralscanUSBBroadcastTest.apk This APK is Broadcast receiver demo APK.
usb-service-test This directory is source code for broadcast receiver APK.
Please use Eclipse to import all souce code
Note：Please use service to invoke the Generalscan USB Accessory JAR libaray ，it will
decrease the CPU utilization ,improve the battery power comsuption.
Android USB Accessory SDK Guide
USB Accessory Broadcast server App