Wt Series Product Outllook; Wt Series Installation - Generalscan GS-M100BT Quick Start Manual

WT Series Product Outllook

⑨
⑤
⑩
Function Description
Item
1 Power Switch
2 External Charging Port
3 LED Indicator(Blue or Red
color)
4 Micro USB
5 Buckle Button for Armmount Press the button to dismantle the arm mount
6 Strap Hole
7 Spring cable for scanner
8 Smart phone Platform
9 Battery Door
10 Buckle for battery door
11 Smartphone Micro-USB plug for communication with smartphone

WT Series Installation

1.Put the smartphone with protective case
and fix with double side magic sticker
2.Reference figure-11, plug Micro-USB into
Android smartphone
3.Put the battery into compartment and close
the battery door.
4.Power on the pow switch (Figure-1),make
sure the blue LED turn on.
5.Power on the ring scanner power switch.
6.Install Generalscan Input or SDK to use.
③
Name
WT Series Quick Start Guide
⑥
①
⑦
⑧
④
Switch to left or right for power on /off
Only for GS-WT1000BT for charging GS-R1000BT
USB Accessory LED,When USB Accessory detected by
Android,The blue led will turn on.When in
charging,red LED will turn on.
Charging for internal battery
Fix the magic sticker
Connect ring scanner to arm mount
Use double side magice sticker to fix smartphone
Open the door to change the battery
To fasten the battery door
⑾
Description
③
②
⑨