Multiple-Disc Cd Player - Chevrolet HHR 2008 Getting To Know Manual

Getting to Know Your HHR
12
To set the time (with date display,
if equipped):
1. Turn on the radio.
2. Press the (Clock) button. Or, if
equipped, press the MENU button
until the clock option is displayed; and
then press the pushbutton located
under the clock option label. The HR,
MIN, MM, DD, YYYY labels will
appear on the display.
3. Press the pushbutton under any of the
labels to be changed.
4. Press the pushbutton again or the
FWD button to increase the numbers.
Press the REV button to decrease the
numbers. Rotating the
knob also will increase or decrease
the selected label.
5. Press the Clock or MENU button
again to set the currently displayed
time and date.
MP3 Capability (if equipped)
If your AM/FM stereo with CD has MP3
playing capability, a CD-R or CD-RW
containing MP3 audio tracks will play
automatically when inserted into the CD
player. An MP3 label will be displayed.
Portable Audio Device (if equipped)
A portable audio device (iPod
MP3 player or other portable-type player)
can be connected to the auxiliary input
jack located on the radio. When connect-
ed, the radio automatically begins playing
audio from the player over the vehicle
speakers. To optimize volume, fully
increase the volume on your device.
Radio Data System (if equipped)
When you tune in a Radio Data System
(RDS) station, the station name and call
letters will appear on the display instead
of the frequency. RDS stations may also
provide the time of day, a program type
for current programming and the name of
the program being broadcast.
RDS features are available for use only
on FM stations that broadcast RDS
information. RDS relies on receiving
specific information from these stations
and will work only when the information
is available.
See Section 3 of your Owner Manual.

Multiple-Disc CD Player

(if equipped)
With the in-dash 6-Disc CD Player, note
that you cannot directly load a CD as in
(Tune)
single-play systems.
To load a CD(s):
• Press and release the LOAD
• Press and hold the LOAD
To play a specific CD:
• Press the pushbutton below the arrow
® ®
, Palm ,
To eject a CD:
• To eject the CD that is currently play-
• To eject all CDs, press and hold the
button to load one CD. Wait for the
display prompt before loading the CD.
for two seconds to load multiple CDs.
Follow the display prompts to load
each CD. Press the LOAD
again to cancel loading more CDs.
label on the display to select the
desired CD number.
ing, press the
once.
EJECT button for two seconds.
button
button
EJECT button