Chevrolet HHR 2008 Getting To Know Manual page 11

(automatic transmission) or into Neutral
and set the parking brake (manual
transmission).
Note: Engaging in extended searching for
specific audio stations or songs by using
buttons and knobs — or giving extended
attention to entertainment tasks — can
lead you to look away from the road
frequently or for prolonged periods, which
may cause you to miss seeing things
on the road that you need to see. Avoid
engaging in extended searching for
specific items while driving.
To set up to 18 preset stations:
1. Turn on the radio.
2. Press BAND to select FM1, FM2
or AM.
3. Tune in the desired radio station.
4. Press and hold one of the six num-
bered pushbuttons until a beep
sounds.
5. Repeat steps 2–4 for each
pushbutton.
Setting Favorite Stations (if equipped)
Press the FAV (Favorite) button to go
through up to six pages of any combi-
nation (AM, FM, or XM, if equipped) of
favorite radio stations. On each page, up
to six stations are available by using the
six pushbuttons below the radio display.
To set the number of favorite station
pages:
1. Press the MENU button to display the
radio setup menu.
2. Press the pushbutton below the FAV
1–6 label on the radio display.
3. Select the desired number of favorite
station pages.
4. Press the FAV button. You may now
begin storing your favorite stations for
the chosen number of pages.
To store favorite stations:
1. Tune in the desired radio station.
2. Press the FAV button to display the
page where the station is to be
stored.
3. Press and hold one of the six push-
buttons until a beep sounds.
4. Repeat the steps for each pushbutton
on each page.
Setting the Speed Compensated
Volume (if equipped)
With Speed Compensated Volume, the
radio automatically adjusts the volume to
compensate for road noise as vehicle
speed changes.
To set Speed Compensated Volume:
1. Set the radio volume to the desired
level.
2. Press the MENU button to display the
radio setup menu.
3. Press the pushbutton below the auto
volume label on the radio display.
4. Press the pushbutton under the
desired setting (Off, Low, Medium
or High) to select the level of
compensation.
5. The compensation will be set once the
display times out after 10 seconds.
Setting the Time
To set the time (without date display):
1. Turn on the radio.
2. Press the (Clock) button until the
hour numbers begin flashing on the
radio display. Press the button again
to adjust the minute numbers.
3. With either the hour or minute num-
bers flashing, use the
to select the time.
4. Press the Clock button again to set
the currently displayed time.
11
(Tune) knob