Voxx PRO9776E Owner's Manual

Pursuit series

Hide thumbs

Table of Contents

Quick Links

Download this manual

Need help?

Do you have a question about the PRO9776E and is the answer not in the manual?

Questions and answers

Summary of Contents for Voxx PRO9776E

Page 1: Table Of Contents
Model PRO9776E Owner’s Manual Table Of Contents: Features and Options Page 2 Arming The System-Active Page 3 - 4 Protection While The System Is Armed Page 4 Disarming The System Page 5 While The System Is Sounding Page 5 Intrusion Signals and Tones...
Page 2: Features And Options
5 Button Remote Start Security System With Plug-In Shock Sensor and Starter Disable FEATURES:  2 Five Button Programmable RF Transmitters  Seven Channel Code Learning Receiver (capable of accepting 4 transmitters)  Code Hopping Technology  Selectable Manual Override Mode ...
Page 3: Arming The System-Active
YOUR "SPREAD SPECTRUM" TRANSMITTERS The transmitters included with your new security system use the most advanced and secure form of radio frequency transmission available on any current automotive security system. Some of today’s sophisticated auto thieves use a device known as a code grabber, which will receive and store the signal from your keychain transmitter and re-transmit at a later time to disarm your system.
Page 4: Protection While The System Is Armed
SILENT ARMING - ACTIVE (Feature must be activated during programming) During step 2 above, hold the transmitter button for 2 seconds then release. The unit will arm without the chirps for this one lock cycle. ARMING THE SYSTEM - PASSIVE (AUTOMATIC) (Must be activated during programming) 1.
Page 5: Disarming The System
 Any mild impact to the vehicle’s glass will cause the alarm to sound a short series of warning tones.  Any strong impact to the vehicle’s glass will cause the alarm to trigger for the full 30 second alarm cycle. NOTE: If the optional interior illumination circuit was installed, the interior light will flash as well for the full 30 second alarm cycle.
Page 6: Valet Override, Programming And Safety Control Switch
INTRUSION WARNING SIGNAL This system will inform you if an intrusion attempt has occurred while you were away from the vehicle. Upon disarm, the siren will chirp 4 times and the parking lights will flash 3 times. Enter the vehicle and before turning on the ignition switch, observe the LED flash pattern.
Page 7: Programming Your Custom Override Code
Programming Your Custom Override Code: Unlike override switches easily found, and defeated, this security system allows the consumer to program a personal override code, offering a higher level of security. To take advantage of this option, programmable feature # 9 must be selected for the Custom Code Option.
Page 8: Using The Custom Code Override
8. Turn the ignition switch to the OFF position. Immediately observe the LED flash pattern. You will notice the LED flashing five times, pause, and then flash two times, pause. This pattern will be repeated three times indicating the new code (52) has been accepted and stored in memory.
Page 9: Push Button Led Receiver Safety Control Switch
To use remote panic: 1. Press and hold the Lock or Unlock button on the keychain transmitter for 3 or more seconds. The alarm will immediately sound. 2. To stop the alarm, press and hold the Lock or Unlock button on the transmitter again for 3 seconds.
Page 10: Remote Starting The Vehicle
With the turbo timer mode selected on, after you've arrived at your destination, while the engine is still running, set the parking brake, pause 2 seconds, then turn the ignition switch to the off position. The engine will continue to run the allotted time according to the selection during installation.
Page 11: Automatic Start Timer Operation
OPERATING ON AUTOMATIC START UP TIMER MODE This unit has the ability to automatically start the vehicle every 2 or 4 hours over a 48 hour period. This feature is especially useful in cold climates where the only means to keep the engine and engine fluids warm is to periodically start the engine.
Page 12 ADDITIONAL REMOTE FUNCTION (CHANNEL 4) This system has an additional feature that can be connected to a number of different optional accessories. Some of the more common uses for this channel are:  Can Be Set Up To Activate Rear Window Defogger During Remote Start If Vehicle Is So Equipped ...
Page 13: Telematic Upgrade
TELEMATIC UPGRADE: This system has the ability to have a telematic upgrade module connected to it. This is an upgrade that can give you control of certain functions of your vehicle from a telephone or in some cases a computer interface. Please check with your instal- lation center for most recent Telematic Upgrades.
Page 14 NOTE: Certain systems have the ability to utilize channels 6 and 7 for driver priority programming. For driver priority, the vehicle must be equipped with this fea- ture, and the optional feature must be set up and installed by your installation center.
Page 15: System Functions At A Glance
PRO9776E SYSTEM FUNCTIONS AT A GLANCE ALARM DASH LED INDICATORS RAPID FLASHING PASSIVE ARMING SLOW FLASHING ARMED DISARMED ON SOLID VALET MODE 3 FLASH... PAUSE INTRUSION ZONE 3 2 FLASH...PAUSE INTRUSION ZONE 2 1 FLASH...PAUSE INTRUSION ZONE 1 ALARM SIREN CHIRP INDICATION...

Voxx PRO9776E Owner's Manual

Quick Links

Table Of Contents:

Need help?

Questions and answers

Related Manuals for Voxx PRO9776E

Summary of Contents for Voxx PRO9776E

Table of Contents