Battery; Specifications - Bartington MAG-03PSU Operation & Maintenance Manual

14 SPECIFICATIONS

Mechanical
Materials
Dimensions
Electrical
Sensor analog input
and power output
Outputs
Sensor power supply :

Battery

Battery alarm
Internal charger
Battery charger
input
The pin allocation for the 10 way Hirose connector to the sensor is as follows:
PIN
1
2
3
4
5
6
7
8,9,10
: high strength ABS
: 133mm x 84mm x 46mm
: 10 pole Hirose plug type RM15TRD-1OP
: 3 BNC connectors
±12 V at 1 W
: PANASONIC type LCR6V1.3P
6 V 1.3 Ah Sealed lead/acid - provides up to 10 hours
continuous use depending on condition and state of charge
of batteries.
(Alternative YUASA NP 1.2-6)
: sounds when battery voltage less than 5 V and at switch on
: temperature compensated constant voltage type - charges
battery in five hours. Continuous use is permitted.
: via 2.1 mm dc socket
voltage 6-18 V
current 500 mA max.
signal/power ground
signal/power ground
+12 V supply
-12 V supply
no connection
SIGNAL
X out
Y out
Z out
OM0065 ISSUE 5 PAGE 11 of 21