Operating Procedures / Photos
Disassemble back cover
Unscrew 2 screws on the front side of front panel and
3 screws on the back cover to remove the back cover.
Disassemble centrifugal fan
Unscrew the nut on the centrifugal fan to remove the
centrifugal fan.
Disassemble electric box
Unscrew a screw on the electric box cover to remove
the electric box cover. Unscrew the screws fixing mainboard,
capacity, plasma and anion generator, and pull out the
motor insert component to remove the mainboard,
capacity, plasma and anion generator
screw
back cover
screw
electric box cover
centrifugal fan
nut
screw
electric box
cover