Sinclair SP-300A Service Manual page 11

Hide thumbs Also See for SP-300A:
Table of Contents

Advertisement

I f i t i s n o t i n u s e f o r a l o n g t e r m
1. Please switch off, unplug the power plug, and tie up power cord.
2. Clean each filter part, air inlet, outlet and the host body.
3. Place the carbon filter in a suitable plastic bag, seal it, and put it in the machine.
4. Cover it with dust cover, and place it in a shade and well-ventilated place.
R e p l a c e B a t t e r y
1. Open the back cover of the remote
control according to the arrow direction.
2. Replace it with CR2025 battery, and then
close the lid.
Note:
• The battery should be placed where children can not reach. If a child
accidentally swallow the battery, you should quickly get in touch with
the doctor.
• Before the battery is discarded, please use the tape etc. wrap it at both
ends of positive and negative poles to prevent mixing with other metals
or batteries and causing fever, rupture, fire and so on.
• When the battery is not used any longer, please put it into battery
recycling place at the nearest electrical shop, watch, or camera stores.
• The criteria for replacing battery is 1 year. However, if it is not found
insensitive in receiving signals, please replace the battery.
• Please replace the battery as soon as possible when it is close to the
battery lifespan.
• In order to avoid the failure and injury caused by fluid leakage or rupture,
please remove the battery if it is not in use for a long time.
Battery

Advertisement

Table of Contents
loading

Table of Contents