Edit, Remove, Or Rename Host Topology - Dell PowerVault MD Series Administrator's Manual

1. In the AMW menu bar, select Monitor → Health → iSCSI Statistics.
The View iSCSI Statistics window is displayed.
2. Select the iSCSI statistic type you want to view in the iSCSI Statistics Type area. You can select:
– Ethernet MAC statistics
– Ethernet TCP/IP statistics
– Target (protocol) statistics
– Local initiator (protocol) statistics
3. In the Options area, select:
– Raw statistics — To view the raw statistics. Raw statistics are all the statistics that have been gathered
since the RAID controller modules were started.
– Baseline statistics — To view the baseline statistics. Baseline statistics are point-in-time statistics that
have been gathered since you set the baseline time.
After you select the statistics type and either raw or baseline statistics, the details of the statistics appear in the
statistics tables.
NOTE: You can click Save As to save the statistics that you are viewing in a text file.
4. To set the baseline for the statistics:
a) Select Baseline statistics.
b) Click Set Baseline.
c) Confirm that you want to set the baseline statistics in the dialog that is displayed.
The baseline time shows the latest time you set the baseline. The sampling interval is the difference in time from
when you set the baseline until you launch the dialog or click Refresh.
NOTE: You must first set a baseline before you can compare baseline statistics.

Edit, Remove, Or Rename Host Topology

If you give access to the incorrect host or the incorrect host group, you can remove or edit the host topology. Follow the
appropriate procedures given in the following table to correct the host topology.
Table 2. Host Topology Actions
Desired Action
Move a host
Move a host group
Manually delete the host and
the host group
Rename the host or the host
group
For more information about Host, Host Groups, and Host Topology, see
52
Steps to Complete Action
1. Click the Host Mappings tab.
2. Select the Host that you want to move, and then select Host Mappings → Move.
3. Select a host group to move the host to and click OK.
1. Click the Host Mappings tab.
2. Select the item that you want to remove and select Host Mappings → Remove.
1. Click the Host Mappings tab.
2. Select the item that you want to remove and select Host Mappings → Rename.
3. Type a new label for the host and click OK.
About Your Host.