Table of Contents
Advertisement
Contact Tech Support at 1.800.215.7015 or email at support@unidencellular.com
iMPOrtant:
1
Verify that you have left at least 20 feet of vertical separation space
between the indoor and outdoor antennas.
2
Never point the front of the yagi signal (outdoor) antenna towards
the inside of the distribution (indoor) antenna.
3
Verify that the supplied coaxial cables from both the signal (outdoor)
antenna and the distribution (indoor) antenna are properly
connected to the cellular booster before powering it up.
4
Carefully plug in the supplied 110-volt power adaptor into the back
of the cellular booster where it is marked 'power' and connect the
other end to a power outlet.
!
CHeCk tHe Cellular bOOSter led
alarM ligHtS
Your cellular booster comes equipped with electronic sensors designed to
identify cellular signal overload or oscillation which can hinder signal-boosting
performance. Your cellular booster is specially designed to automatically
decrease gain to compensate for these circumstances. The device also has a
feature to automatically shut down in case of excessive oscillation.
Warning!
Using a power supply that is not
included in your kit could damage your equipment
and void your warranty.
22
Hide quick links:
Advertisement
Table of Contents
